In optical microscopes, there is a fundamental trade-off between field-of-view and resolution: the finer the detail, the smaller the region imaged by the microscope. One way to overcome this limitation is to translate the sample and acquire images over a larger field-of-view. The basic idea is to stitch together many high resolution images to form […]
Desktop Gigapixel Microscope Continue Reading
In this instructable I am going to be building a arduino based fight data recorder for RC vehicles, specifically RC aeroplanes. I am going to be using a UBlox Neo 6m GPS module connected to an arduino pro mini and a SD card shield to record the data. This project is going to record the
RC Flight Data Recorder/Black Box Continue Reading
The goal of this project was to make a DMX-Controlled plug box which would allow on-stage effects or devices to be triggered remotely from the lighting console. This could potentially eliminate the need for a separate control system and operator backstage. This controller could be used in a wide variety of applications including: -Triggering FX
DMX Effect Controller Continue Reading
Do you get nightmares of losing your YouTube Subscribers? If you do, you are not the only one. Luckily I have made this “YouTube Desktop Notifier” to keep me up-to-date with my channels Subscriber and View Counts. This very simple DIY project cost me around $10 and it now keeps me in track with my
YouTube Desktop Notifier Continue Reading
This Instructables is all about setting up ESP32 CAM Webserver. The goal here is to connect ESP32 CAM with FTDI Module and program it with the CAM WEB SERVER sketch which will allow us to monitor the camera feed via a web app. The Next Level of this project is to make a ROCK SOLID
ESP32 CAM WEB Server and Getting Started Guide Continue Reading
INTRODUCTION Hi. I’ve built this little device for my HNC project back in the old days (2015). Because I like photography, and my task was to make something using microcontrollers. I’ve made this little device using Arduino UNO, as this was an ideal board for this job (and cheapest). There were quite a few similar
COD (Camera on Deck) – Motion Time Lapse Continue Reading
Supplies The parts list for this build is quite lengthy, but a lot of these components you may having lying around if you do have an old 3D printer. The 3D printer I’ve used to print some of the plastic components and housings is a Creality Ender 3 Pro. Links from Amazon (Affiliate) 2040 Aluminium Extrusion
Make a Motorised Pan and Rotate Camera Slider Continue Reading
How to Make a Gimbal Learn how to make a 2-axis gimbal for your action camera In today’s culture we all love recording video and capturing the moments, especially when you are a content creator like me, you sure have faced the issue of such shaky videos from time to time. So in this blog
Gimbal Stabilizer Project Continue Reading
This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com) tep 1: Materials List In order to begin the project, you first have to know what you’ll be working with! Here are the materials you should have before you begin: 1x Arduino Uno R3 microcontroller
Gyroscope Platform/ Camera Gimbal Continue Reading
I have been shooting water drops for a while now…. since 2017. I still remember how excited I was when I got water drops bounce from the surface with my first setup I made with Littlebits… With these setups (Mark I and Mark II) I became inspired to give it a go and finally I
Splash! Water Droplet Photography Continue Reading
