This Instructable started as my great interest in the TV show Toast of London. The British Matt Berry comedy that can now be found on Netflix has some superb voice overs that I wanted to accommodate in my morning toaster routine. In a running joke, he was required to make recordings for the British Navy for their […]
This is my first instructable, I hope you will Like It!! Basically, In this Project I have used the Serial Communication between my Arduino and my Laptop, to transmit music data from my laptop to the Arduino. And using the Arduino TIMERS to play the data as a PWM signal. I wanted to mention that,
Play Songs(MP3) With Arduino Using PWM on Speaker or Flyback Transformer Continue Reading
The Ultrasonic Theremin is an Arduino project that uses a cheap theremin to teach sound waves. By changing the distance of my hand to the device, I am changing the frequency of the sound waves. Also, moving a potentiometer changes the amplitude of the wave. This can be used as a science lesson about sound
Ultrasonic Theremin (Teach Sound) Continue Reading
In the past few years, a number of synthesizer manufacturers have been releasing “desktop semi-modular” instruments. They generally take the same form factor as the Eurorack modular synthesizer format and most are probably intended as a gateway drug into the world of modular. (As addictions go, it’s one of the safer ones.) I fell for
Oceania Midi Controller (for Make Noise 0-Coast and Other Synths) Continue Reading
Are you the kind of person who’s not good with managing keys and always have to try each key for every other lock? Well don’t worry, just grab a little bit of motivation and your maker tools to innovate your very own voice controlled smart key holder. Because there’s no problem too small or big
Voice Controlled Smart Key Holder Continue Reading
I’ve had an AC692N developer board at home for a long time, and now I want to make a music player that works with the STONE serial touch screen. The following functions need to be implemented: 1. Play MP3 files in the USB flash drive 2. Connect the mobile phone with Bluetooth and play mobile
Use the STONE touch screen to make a music player Project introduction Continue Reading
Welcome to my Instructables on how to build a RGB LED backlight for e.g. the back of your TV or desk. The Schematic itself is very simple since the WS2812 LED Strips are very easy to interface with e.g an Arduino Nano. Note: that you do not have to use the additional MSGEQ7 Audio Analyzer circuit if you only want the
RGB Backlight + MSGEQ7 Audio Visualizer Continue Reading
Eye Guardian is an Arduino powered, High-Decibel continuous sound triggered eye protection wear. It detects heavy equipment sound and lowers protective eye goggles while the equipment is in use. Outline In the first step, I will explain the Inspiration&Idea behind this project. Next, I will give you a Tools&Parts list that I have used to
Eye Guardian: Sound Triggered Eye Protection Continue Reading
In this Instructables tutorial, I will teach you how to make a simple 8 key piano with your Arduino. Supplies: Arduino Board Breadboard 10MΩ Resistor*8 Arduino mini box speaker Wires/Jumpers Tape Cardboard Tinfoil (optional) Hot glue gun Step 1: Gather Supplies Here is what you’ll need: Arduino Board Breadboard 10MΩ Resistor*8 (1MΩ Resistors work too)
Arduino 8 Key Tinfoil Piano Continue Reading
Purpose of the Project: To create a Zoetrope system with the button module and DC motor using the Pinoo control card. Duration: 2 lessons Age Group: 9 years and older Set Used: Pinoo Full Set Benefits: • Learns to code Pinoo control card • Learns to code the button module. • Dc engine learns to code. • Improves the
Zoetrope With Pinoo Continue Reading
