Sensor Description The KY-027 Magic Light Cup module consists of two boards, each equipped with an LED and a mercury tilt switch. By utilizing PWM to control the LEDs on both modules, you can simulate the visual effect of light “magically” transferring between them when they are tilted, reminiscent of pouring water between cups, which inspired […]
Random Sensor Project KY-027 Magic Light Cup Module Read More »
This is one of the first projects I have made with Arduino. It’s a little siren with a LED that fades and blinks on and off. It demonstrates basic use of LEDs and speakers. Also check out this article: 8-Pin Programming Shield Constructive criticism is appreciated! Let’s get started! Step 2: Solder jumper wires
Make a Mini LED Siren powered by Arduino Read More »
This Instructable will walk you through my process of making a Slot Machine costume with addressable leds controlled with an arduino! Step 2: Lets Get started Picture set up: I found my slot picture online that the best graphic that when enlarged would stay nice and clear. Be sure to follow the directions on
Led Slot Machine Costume using Arduino Read More »
Do you ever get frustrated trying to park in just the right spot? Have you gotten tired of using a tennis ball as a guide? Is it time for something a little smarter? Now you can upgrade your garage with an Ultrasonic smart parking assistant that has a large LED indicator to let you know
Parking Assistant Arduino Project Read More »
So, instead of buying a nightlight for my kid’s room, I decided I could do a much better job of it. This nightlight cycles through 1500 colors over 7 mins and turns on when it is dark and turns off when it is light. It is also small enough into small objects to add effect.
Color Changing Nightlight using Arduino Read More »
I’ve been encountering lots or Arduino projects but generally most are on intermediate and advanced level and only a few basic instructions on how to start with Arduino. This project I made were actually inspired by this example on the Arduino page, but a much in depth step by step instructions. Assuming that you already
Arduino Basics: Working One LED Read More »
I was recently reserching on LEDs and I stumbled upon this page as I read it I found that LEDs are not just used to emit light but the also have the ability to sense light.At first using LED as light sensor sounds complicated but it quiet quickly becomes clear. This is a fun project in
Light Sensing LEDs using Arduino Read More »
This instructable shows you how to build a Web-enabled tri-color LED based on an Arduino and the WIZnet Ethernet shield, controllable from any Web browser . Check the live demo at http://try.yaler.net/~arduino/led Because the LED is exposed through a simple RESTful web service running on the Arduino color changes can also be triggered by Pachube
Web Controlled Arduino LED Read More »
This is a pretty simple game: The Arduino shows a number in binary on the green LEDs. You then guess whether your green number is bigger than the computer’s number. The Arduino shows its number on the red LEDs. If you were right, you will see a green flashing pattern. If you are wrong, you’ll
High-Low Binary LED Arduino Game Read More »
This 3X3X3 ft. LED PVC cube is the ultimate in mood light fun! An LED (light emitting diode) will burn longer than traditional bulbs so that you can enjoy your giant light for a LONG LONG time. Build it and see! Step 1: WARNING!!! THIS PROJECT WILL COST ABOUT $150 Also…. make sure that your dimensions
3x3x3 LED PVC Light Cube using Arduino Read More »
