This is a pretty simple game: The Arduino shows a number in binary on the green LEDs. You then guess whether your green number is bigger than the computer’s number. The Arduino shows its number on the red LEDs. If you were right, you will see a green flashing pattern. If you are wrong, you’ll
High-Low Binary LED Arduino Game Continue Reading
This 3X3X3 ft. LED PVC cube is the ultimate in mood light fun! An LED (light emitting diode) will burn longer than traditional bulbs so that you can enjoy your giant light for a LONG LONG time. Build it and see! Step 1: WARNING!!! THIS PROJECT WILL COST ABOUT $150 Also…. make sure that your dimensions
3x3x3 LED PVC Light Cube using Arduino Continue Reading
I was recently reserching on LEDs and I stumbled upon this page as I read it I found that LEDs are not just used to emit light but the also have the ability to sense light.At first using LED as light sensor sounds complicated but it quiet quickly becomes clear. This is a fun project in
Light Sensing LEDs using Arduino Continue Reading
So, instead of buying a nightlight for my kid’s room, I decided I could do a much better job of it. This nightlight cycles through 1500 colors over 7 mins and turns on when it is dark and turns off when it is light. It is also small enough into small objects to add effect.
Color Changing Nightlight using Arduino Continue Reading
This is my instructable on charlieplexing a LED row/string with the arduino. I noticed that there weren’t many instructables on charlieplexing using an arduino, so i made this. I tried to keep the project simple, but that didn’t work very well. The soldering is complex, I wouldn’t recommend this as a first time soldering project.
Charlieplexed row of LED lights, for the Arduino Continue Reading
I know LEGO has the Mindstorms-set that probably is great, but wouldn’t it be even better (and cheaper) to hack your regular bricks into your own micro controller controlled LEGO? Well I think so! I had this idea for a long time, but to many other projects stood in the way until Tristram posted this
LEGO + Arduino = Brickduino (1. the LED) Continue Reading
This instructable is part of the “Brickduino” series. [Brickduino 1. LED] – I expect that you did the Brickduino LED before you start with this instructable – Mainly this instructable is the same as the Brickduino LED! So if you want to skip all the steps that are the same than jump directly to step
Brickduino (2. Parallel connector) Continue Reading
This is one of the first projects I have made with Arduino. It’s a little siren with a LED that fades and blinks on and off. It demonstrates basic use of LEDs and speakers. Also check out this article: 8-Pin Programming Shield Constructive criticism is appreciated! Let’s get started! Step 2: Solder jumper wires
Make a Mini LED Siren powered by Arduino Continue Reading
This Instructable will walk you through my process of making a Slot Machine costume with addressable leds controlled with an arduino! Step 2: Lets Get started Picture set up: I found my slot picture online that the best graphic that when enlarged would stay nice and clear. Be sure to follow the directions on
Led Slot Machine Costume using Arduino Continue Reading
