Hey there! This is my first Instructable. The Quiz buzzer plans kicked off when my colleague, who also hosts a game show asked for people who could build a Quiz Buzzer. I took upon this project and with the help of few friends (Blaze and Errol) and Arduino i was able to accomplish this. Currently, […]
I built this Arduino based automatic LED light controller for a set of poorly lit stairs in our new home. The stairs are quite dangerous – especially at night – but not any more thanks to the Motion Activated Automatic LED Stair Lighting with Arduino (a.k.a. “the stair butler”). By carefully positioning the LED’s and
Motion Activated Automatic LED Stair Lighting With Arduino Continue Reading
The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a
About This Candle & How to Read This Instructable Here’s my take on a LED candle that offers the full experience of a real candle. Start to finish. Be sure to watch the YouTube video below! Background: I bought my first Arduino about 3 years ago with a LED candle project in mind. I wanted to make
LED Candle – Lights, Flickers, Blows Out, Smokes, and Smells Continue Reading
This Instructable is a variant of the original IV Swinger 2: https://www.instructables.com/id/IV-Swinger-2-a-50-IV-Curve-Tracer/ If you came here from there, welcome! Otherwise, please visit that Instructable first. You may or may not end up back here depending on which variant you have chosen.. Step 1: Understand the HW Design / Choose Variant Please refer to Step 1 in
In my first Instructable Motion Activated Automatic LED Stair Lights with Arduino I mentioned the use of “Cooperative Multitasking”. So what is it and why is it helpful? This Instructable attempts to answer the “what is it” and “why is it helpful” question with a simple example that step by step builds up into a more complex
Cooperative Multitasking on Arduino – With Pretty Blinky Lights! Continue Reading
After building some of these: https://www.instructables.com/id/Matrix-LED-Light/ i’ve decided to bring the candle onto another level. While the first one looks good, it does look a little bit too much like the original. Nothing against the first design. It looks cool and modern. My new approach is a little bit warmer and uses different materials. Still
Surfing is an activity predominantly enjoyed during the day, primarily for reasons of warmth and water safety. Of course, if you prefer to carve the waves at night, you might enjoy the latest project from [Moritz Sivers] – a surfboard kitted out with motion-reactive LEDs. The build consists of a regular surfboard, with a channel cut
The Ultrasonic Theremin is an Arduino project that uses a cheap theremin to teach sound waves. By changing the distance of my hand to the device, I am changing the frequency of the sound waves. Also, moving a potentiometer changes the amplitude of the wave. This can be used as a science lesson about sound
A pyranometer measures the sun’s irradiance (power/area, basically “brightness”) on a surface. Despite the similar names, it is completely different from a pyrometer, so stop right here if that is what you are looking for. This Instructable describes how to build and test a modified version of the pyranometer kit offered by Dr. David Brooks of the
