Way back in the year 2015 we designed a Simple Dual Axis Tracker for use as a fun student or hobby project. It was small, noisy, a little complicated, and provoked a lot of really weird community comments. That being said, three and a half years later we’re still getting emails and phone calls from people all […]
Dual Axis Tracker V2.0 Read More »
With this sensor stations network configured in a master/slave mode, you will be able to do lighting and security control in your home. These sensor stations (Node01, Node02 in this project) are connected to a master station (Node00) connected to your local wifi network. I have installed the Node01 in my storage room and the
Sensor Stations Network for Lighting and Security Control Read More »
This semester at college, I am in a class called Computing and Craft which is about incorporating circuitry and micro-controllers and craft to bring our projects to the next level. For our first big project, I decided to make a raincoat the reacted to light and water. Being from California and going to school in Massachusetts has
Light and Water Reactive Raincoat Read More »
This is v1.0 of the PasswordPump, a USB device that manages credentials for up to 254 accounts. Credentials (account names, usernames and passwords) are stored ONLY on the device itself, on two removable EEprom chips using military grade encryption (AES-128). They are not stored in the cloud or in a file on your computer where
PasswordPump Passwords Manager Read More »
This project allow us to simulate presence and to detect movements in our home. We can configure a network of devices installed in differents rooms of our home all of them controlled by a main device. This project combines these features on a single device (PICTURE 1): It is a presence simulator: the device switchs on and off one
Home Presence Simulator and Security Control Device Read More »
The problem Imagine this: You wake up one morning and the weather is real good. You want to go to the beach.Because you don’t live too close to the beach, you take your car. To pay for the parkingat the beach, you use your phone. This means that you go to the beach carrying (at
B-Safe, the Portable Safe Read More »
In this instructable i will be showing you a video on how I made a knock lock using the arduino uno starter kit. I did run into a few problems along the way but figured out a solution after thinking it over. this is the first arduino project I have made so i went solely
How to Make the Knock Lock for Arduino Starter Kit Read More »
In this tutorial I will be teaching you how you can build your own Laser Tripwire Security System at home! You will need the following components and materials: LED light Laser Module Laser Sensor Module Speaker or Piezo Buzzer 2 Small Breadboards with sticky tape on the back Arduino Breadboard wires USB Cable (to program
DIY | Easy Arduino Laser Tripwire Security System! Read More »
Hello! In this Instructables guide I will show you how to make your own password unlock door system by using the Arduino uno board. I made my own circuit by using the ATmega328 micro controller but this is an optional step. In this guide I will help you to make it easily on breadboard by
Arduino Password Unlock Door Security System Read More »
There are a lot of ways that you can activate an electronic lock. You can use passwords, radio signals, or even voice commands. In this project, I am going to show you how to make a lock box that opens and closes based on color recognition. With a color recognition lock, anything can be a
Color Recognition Lock Read More »
