The world’s first completely open-source Bitcoin ATM for Education and Experimentation. http://openbitcoinatm.org for more information. Step 1: Fabricate Box and Faceplate Out of a piece of 12″x12″ aluminum sheet metal, cut two rectangles and drill six rivet holes and four holes to attach the bill acceptor. Cut aluminum angle into two 11 1/2″ lengths. For each […]
Open Bitcoin ATM using arduino Read More »
I have been spending the last few months doing research into biologically inspired robotic structures. While my approach may seem formalistic in nature, these devices were simply a means for ultimately conducting social research. This desire stems from my experience building Simple Bots, and their subsequent display at multiple Maker Faires. While displaying these robots,
3D-Printed Biologically-Inspired Robotics Read More »
Let’s make a simple inverted balancing robot, and operate it. You need only half a day to do them, if you have an arduino and some materials. [a video of a robot you would make] introduction: After a few work with arduino, I have thought of making an inverted pendulum. Then I had two policies
A Simple and Very Easy Inverted Pendulum Balancing Robot Read More »
Wex detects your location with ultrasonic sensors then follows you with his one flashing eye. His red “heartbeat” can be seen through his mouth. Step 1: Parts needed include: Arduino Two ping ultrasonic sensors Futaba s3103 servo Radio Shack 276-0016 7 color led Radio Shack 276-036 flashing red led 9 volt battery 480 ohm resistor
Wex, the One Eyed Watcher using an Arduino Read More »
Project Gado is an initiative which aims to create an open-source archival scanning robot which small archives can purchase for $500 and use to autonomously scan their photographic collections. This talk presents the Gado 2, a prototype
Building an Open Archival Scanning Robot Using Python and Arduino Read More »
Welcome! I have been in robotics since I was a kid and I am very passionate by robotics. I learn BEAM robotics around 1997-98 and started building robots for a science faire project call “Insectroides” in 2001. http://robomaniac.solarbotics.net ( they change server and the website links does not work anymore it is on Linux and
How to Build a Robot – The BeetleBot Read More »
udar Muthu gives a talk on Making Robots Using Android and Arduino at Droidcon India 2011 by HasGeek.
Making Robots Using Android and Arduino Read More »
I’ve made a video documentation of my midterm project for my 544 class. To keep it shorter, I didn’t detail in the video that this is only a completed phase of a larger project: an autonomous robot seal. I was originally going to incorporate a whole body that hid his components, but this current prototype
Buddy the on-screen seal Robot Read More »
This page provides general information to students enrolled in the EML 6808 course, Analysis and Control of Robot Manipulators. Prerequisites for the course are: EML 4312C, EML 5271, or C.I. Kinematics and dynamics of multibody systems. The topics to be covered include: basic components of robotic systems; selection of coordinate frames; homogeneous transformations; solutions to
Arduino MMAE Graduate Robotics Read More »
I wanted to see if I could operate my Roomba remotely and get it to report its status via Twitter while I was away from home. I also wanted to make the device independent of a computer. This is the solution I came up with and it works very well. Follow @TheRoomba on Twitter to
Web-controlled Twittering Roomba using an Arduino Read More »
