Finalized Prototype Shown below is the finalized prototype. The purpose of the prototype was to demonstrate the feasibility of a small, highly maneuverable search and rescue robot. As such, the completed prototype was successful. Capabilities include a ground speed of 10 inches per second, battery life of 50 minutes, wireless range of between 50 and […]
Highly maneuverable search and rescue robot Continue Reading
Here is part 1 of the Arduino and L293D Robot.This is part of a series of instructables leading to a Line follower Robot. This is a basic Robot made by controlling two motors via the L293D chip through an Arduino Board. I have done this project in the past with similar set up just not with an Arduino Board. Do
Arduino and L293D Robot ( Part 1 ) Continue Reading
Introduction The idea of this project was to design and construct a robot that consists of a body and two wheels that would be able to balance on its own. This behavior is similar how a segway (a new mode of transportation) works. Our goal was to have a working finished product – a robot
The Self-Balancing Robot using Arduino Continue Reading
Arduino Hexapod Robot Design I will show you how to build an arduino hexapod robot, from building the body, to how to implement the algorithm. To learn about the implementation of the algorithm, read this first, if you are not sure what is IK, read this. China_icon 中文翻译：http://blog.oscarliang.net/arduino-liu-zhua-kun-chong-liu-zhua-shou-ji-yuan-dai-ma/ I ordered parts from a robot frame
Arduino Hexapod Robot Continue Reading
This instructable will show you how to convert an old toy R/C car from the thrift-store ($1.50) into a bluetooth controlled robot. To make the conversion, you will need an Arduino (any type), an L298N dual 2-amp motor-controller (or similar), and a bluetooth serial adapter from Sparkfun.com. We will first remove all existing circuitry from
Arduino controlled Bluetooth-bot Continue Reading
IP Control Car was launched in 2001. I make the similar function car utilizing commercialized products. The concept of Car No.02 is to utilize commercialized products, and I am an amateur in electrical. So, do not blame me that the system is not sophisticated, i.e. servo & speed controller control system and webcam system are
Steering Wheel Drive R/C Car with Arduino Continue Reading
Wanted to make your own robot but couldn’t afford the fancy H-Bridge IC’s or etch your own PCB? Want a quick and dirty method of making your own wheeled robot? Then you’re in luck, but if you want to make your own wheeled robot AND have a quick and dirty wireless controller for anything then
Tyco RC Arduino Robot Continue Reading
Age: 13 Meet Uno the Arduino powered robot. Some functions include a blinking nose, moving antennas, rotating head, IR distance sensor, twin motor gear box and rotation counters. Uno is made with relatively easy to obtain parts. This project provides a good introduction to Arduino. robot.skp475 KB Step 1: Materials Material and tools • Foam board • Fimo • 4 Rare Earth magnets • 4 small metal
Uno The Arduino Robot Continue Reading
The operation of this Robot is quite simple. Infra-red sensors placed at the front of the chassis will monitor when our Robot is over a black line or when it is over a white background. In this project we will use the appropriate rounded chassis to the Robot. In case the robot being on the
LINUSBot – Line Follower Robot using Arduino Continue Reading
