This is a project in attempting to improve it predecessor “Freeform Arduino” by putting it in an enclosure and having it serve the similar purposes as “Palm Arduino Kit” and “Palm Arduino II” which I can carry it in my pocket and be available to use, and to connect to easy available power source specifically […]
Now a days we are spending a lot of time at home, studying and working virtualy, so why not to make our workspace greater with a custom and smart lighting system Arduino and Ws2812b LEDs based. Here I show you how build your Smart Desk LED Light that you can control with an IR remote
Smart Desk LED Light | Smart Lighting W/ Arduino | Neopixels Workspace Continue Reading
Hello and welcome back to another Instructable. In the previous two Instructables, I have shown you how I created PCB coils in Kicad using a Python script, covered the basics of an H bridge, and showed you how I will be using them to control the segments of the 7-segment mechanical display. Make sure you
Hello all! This instructable happens to be part 3 of my ESP series where I continue to experiment and explore the various features of the ESP 8266-01 board. In the first and second part of the series I have mentioned the wonderful capability of this little board to support I2C communication and also interfaced the
Extending GPIOs of ESP8266-01 and IoT || Exploring ESP8266:Part 3 Continue Reading
The objectives of this project were (1) to make an object float, by means of magnetic levitation and controlled by an Arduino Nano and (2) documenting the whole process allowing other people to build one on their own. There were some requirements, too. First, I wanted an object of a certain size and weight, floating
What’s better in the morning than a hot cup of tea?You should keep to the brewing time so that the tea tastes the way you want it to. Unfortunately, there’s always a lot to do and the timer beeps when you’re somewhere else. So we need an automatic “tea extraction machine”….. As always, there are
Hi There, Recently, I finished up on my DIY project Wilson: the IoT hat. Because of the big fun I had creating and using this IoT hat, and given the wonderful feedback it provided to the wearer, I really want to share this project with you. Wilson is a hat equipped with a multicolor LED
Hi there. Christmas is coming closer, and I was wondering if I could put some candles in my room to get in the “christmas mood”. But after a friends house burned down of christmas tree candles, I don’t want to burn real candles into my room. So why don’t let the Arduino light for you?!
4D Systems makes some really nice serial OLEDS. They aren’t hard to use, but the documentation for them is very scattered. This tutorial pulls together the various pieces i’ve found so that you can get up and running very quickly. Start by skimming through the user manual for your particular 4D OLED. µOLED-128-GMD µOLED-96-G1 µOLED-160-GMD1
Displaying Images on 4D OLEDS using Arduino Continue Reading
This is a chrono for measuring the speed and energy of an air rifle pellet. It’s pretty fast and could probably be used for other types of gun, (airsoft , full bore etc) but I have not tested it on them. I initially made this available as a kit of parts and info, it has
