signal Archives - Page 8 of 19 - Use Arduino for Projects

ON SEMICONDUCTOR NCXX333 ZERO DRIFT OPERATIONAL AMPLIFIERS WITH 10 UV OFFSET

Electronics News Updates / By Ibrar Ayyub

ON Semiconductor’s NCxx333 Zero Drift Operational Amplifiers deliver premium analog performances for front end amplifier circuits and power management designs. A comprehensive choice of packages matching industry-standard pinouts, addressing the various form factor requirements for automotive, industrial, telecom, wearable, Internet-of-Things, test equipment, and instrumentation. The high analog performance offered by the zero-drift architecture enhances motor […]

ON SEMICONDUCTOR NCXX333 ZERO DRIFT OPERATIONAL AMPLIFIERS WITH 10 UV OFFSET Continue Reading

ARROW ELECTRONICS INTRODUCES LOW-COST, RAPID PROTOTYPING DATA ACQUISITION PLATFORMS

Electronics News Updates / By Ibrar Ayyub

Low-power, low-noise Analog Devices ICs and Intel MAX 10 FPGA in compact 86.5mm x 25mm outline Analog Devices and Arrow Electronics have worked with Trenz Electronic GmbH to produce three ready-to-use data-acquisition platforms that relieve design and manufacturing challenges for developers of professional measurement instruments. Benefits of the AnalogMAX-DAQ1 Platform: High-accuracy analog front-end: Ideal for

ARROW ELECTRONICS INTRODUCES LOW-COST, RAPID PROTOTYPING DATA ACQUISITION PLATFORMS Continue Reading

MEET THE LINDENIS V536 SOM & SBC DESIGNED FOR AI VIDEO PROCESSING AND 4K ENCODING

Electronics News Updates / By Ibrar Ayyub

Similar to the earlier Lindenis V5 designed for AI video processing and 4K encoding, Lindenis has released another single-board computer that uses SoM and baseboard design for 4K camera applications called the Lindenis V536. The Lindenis V536 which runs on a new Allwinner dual Cortex-A7 processor and a single MIPI SCI interface was designed for applications that rely heavily on popular open-source

MEET THE LINDENIS V536 SOM & SBC DESIGNED FOR AI VIDEO PROCESSING AND 4K ENCODING Continue Reading

COMPACT NON-INVASIVE SENSOR CHIP DEVELOPED TO RECORD MULTIPLE HEART AND LUNG SIGNALS

Electronics News Updates / By Ibrar Ayyub

A team of researchers at the ‘Georgia Institute of Technology’ has come up with a non-invasive sensor-in-a-chip that records details of the heartbeat, respiration rates, and lung sounds. It even tracks the wearer’s physical activities, such as walking. The signals are recorded in sync, potentially giving healthcare workers a detailed overview of a patient’s heart and lungs.

COMPACT NON-INVASIVE SENSOR CHIP DEVELOPED TO RECORD MULTIPLE HEART AND LUNG SIGNALS Continue Reading

Upright Laser Harp

Other Projects / By Ibrar Ayyub

Laser harps are musical devices with laser beam “strings.” When the beam is blocked, a note is played by the instrument. Usually laser harps have the beams travel vertically in the shape of a fan or vertical lines. In this project, I built a laser harp with stacked laser beams that propagate horizontally. The beams

Upright Laser Harp Continue Reading

RIGOL DG952 2-CH 50MHZ ARBITRARY WAVEFORM FUNCTION GENERATOR

Electronics News Updates / By Ibrar Ayyub

The Rigol DG952 50MHz Dual Channel Function Generator, although value-priced, provides highly-accurate 16-bit standard and arbitrary waveforms point by point from its huge 16Mpt memory. Most other AWGs are only 14-bit or less. With a sampling rate of 250MSa/sec, this versatile signal source produces precise, very low jitter waveforms (High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz). A 4.3” Touch

RIGOL DG952 2-CH 50MHZ ARBITRARY WAVEFORM FUNCTION GENERATOR Continue Reading

PSYLINK AN OPEN SOURCE NEURAL INTERFACE FOR NON-INVASIVE EMG

Arduino News / By Ibrar Ayyub

We don’t see many EMG (electromyography) projects, despite how cool the applications can be. This may be because of technical difficulties with seeing the tiny muscular electrical signals amongst the noise, it could be the difficulty of interpreting any signal you do find. Regardless, [hut] has been striving forwards with a stream of prototypes, culminating in

PSYLINK AN OPEN SOURCE NEURAL INTERFACE FOR NON-INVASIVE EMG Continue Reading

HELTEC’S NEW CUBECELL SERIES FOCUSES ON LORA IOT APPLICATIONS

Electronics News Updates / By Ibrar Ayyub

HelTec CubeCell is a new product series made by HelTec. CubeCell series is based on ASR605x ICs (ASR6501, ASR6502), those chips are already blended with the PSoC 4000 series MCU (ARM Cortex M0+ Core) and Semtech SX1262 transceiver. It is perfectly Arduino-compatible and can run the LoRaWAN protocol reliably. Connecting lithium batteries and solar panels are also a notable feature that comes

HELTEC’S NEW CUBECELL SERIES FOCUSES ON LORA IOT APPLICATIONS Continue Reading

Mathematical formula that converts voltage to weight the HX711 is using

Arduino News / By Ibrar Ayyub

Coding wise all good but ive been searching and reading everywhere but still could not find how the HX711 converts voltage coming from the load cell into weight? is there a formula that converts voltage to weight ? if so whatt is this mathematical formula that the HX711 is using?I tried to see if maybe the arduino does the

Mathematical formula that converts voltage to weight the HX711 is using Continue Reading

PicoScope® 5000 Series – Flexible Resolution USB Oscilloscope

Electronics News Updates / By Ibrar Ayyub

Today’s electronic designs employ a wide range of signal types: analog, digital, serial (both high- and low-speed), parallel, audio, video, power distribution and so on. All need to be debugged, measured and validated to ensure that the device under test is functioning correctly and within specification. To handle this variety of signal types, PicoScope 5000D

PicoScope® 5000 Series – Flexible Resolution USB Oscilloscope Continue Reading