Hi everyone! I’d like to share the project I have been working on here. I got inspired to experiment with capacitive touch sensing through a project in my university. I found out about this technology through instructables and used the things I learned here and from other places on the internet to build my own
Interactive Touchless Light Continue Reading
Hi, in this instructable you will learn how to build a very long lasting LED-Matrix-Candle. It looks very modern, doesn’t smoke 😉 and can be reloaded with your smartphonecharger. The yellow light gives you a very good expression of a real flame. To be exact: it is a video of a real flame which is
Matrix LED Candle Light Continue Reading
Turn your NES controller’s START BUTTON into an ON/OFF switch for lights with this Instructable – Other versions I have seen either gut or modify the electronics but in this project the electronics are intact so the controller can be used for retro gaming after the lights go out… I used an LED for the light in this Instructable because
Use Your NES Controller As On/Off Switch for Lights. Continue Reading
I recently had my kitchen updated and knew that lighting would ‘lift’ the look of the cupboards. I went for ‘True Handless’ so I have a gap under the work surface, as well as a kickboard, under cupboard and on the top of the cupboards available and wanted to light them up. After looking around
Arduino Powered, Sensor Controlled Fading LED Light Strips Continue Reading
During my high-school sophomore year, the 3rd floor of our house lighted on fire due to a short circuit. Fortunately, my family was away on vacation for Christmas. But if we were home, wouldn’t it be crucial to tell the direction of fire quickly so that we know the direction to evacuate? Consider another situation.
This project is a small, battery-powered LED ring that fits perfectly inside of your Rav Vast drum. It uses color-changing RGB LEDs and a microphone that allows you to change the color or pattern with changes in volume. You don’t need any special skills for the construction (though you may pick some up along the way) Step
Rav Vast LED Drum Light Continue Reading
The goal of this instructable is to explain how I made a wifi-connected light switch (also called remotes further). The goal of these remotes is to turn on and off several wifi-connected relays. The relays are not explained in this instructable. They are explained in a separate instructable that I made in the past: ESP8266 Wifi
The Ultimate Light Switch Continue Reading
For my daughters second birthday, we decided to get her a kitchen set. But I really wanted to make what we got her special and after being inspired by what some awesome makers had done with the Ikea Duktig Kitchen, we decided to get one and to make some modifications to it to make in
Ikea Kids Kitchen Lights Mod Continue Reading
This nightlight doubles as a trap to catch monsters under the bed! Before you go to sleep at night, place it under your bed and it will catch any monster under there. It even keeps a light on all night to make sure new monsters stay away. This Instructable makes a great project for parents
Monster Catcher Night Light Continue Reading
In the second project in my pick to light, I am using WIFI to pass the data between PC and Arduino. Things used in this project Hardware components Arduino MKR1000 × 1 LED (generic) × 2 Jumper wires (generic) × 1 SparkFun Pushbutton switch 12mm × 1 Resistor 10k ohm × 1 Resistor 330 ohm
Pick to Light Project 2 WiFi Continue Reading
