Overview: This instructable will cover the building process of an 4x4x4 LED Cube. I will be using an Arduino to control the LEDs. Since the Arduino (Freeduino) has a total of 20 pins (including the analog pins) we will not need to have any multiplexing or shift registers. I will take you though what i […]
Arduino 4x4x4 LED Cube Continue Reading
I wanted to create something for my wife as a present and this is what I came up with. This is a dark activated color changing night light. It has a sensor that can tell when the room light is turned off. This then will light a RGB LED and slowly fade through different colors.
Color Changing Night Light with ATtiny using Arduino Continue Reading
In this project, you shall again use two sets of shift registers. These will be connected to the rows and columns of the dot matrix display. You will then show a simple object, or sprite, on the display and animate it. The main aim of this project is to show you how a dot matrix
LED Dot Matrix Display using an Arduino Continue Reading
Shield to control 6 relay, 6 digital input and 6 analog input with Arduino Duemilanove, Arduino UNO. The digital inputs and relay outputs are equipped with an LED that indicates the status. The circuit diagram is very simple: Step 1: Schematics and PCB In this step you can find the circuit diagram and the PCB
Simple Relay Shield for Arduino Continue Reading
Squirt is a motion activated water cannon using Arduino. This was designed for use in the garden but as it’s winter we tested it in the bathroom. It works! True motion tracking is expensive and complicated so this system activates when the victim moves into range and randomises the position of the cannon and the
Squirt – Arduino, motion activated water cannon Continue Reading
Problem: So my nutritionist (doesn’t everyone have a nutritionist) suggested I should increase my exercise which primarily consists of walking my dog. She even gave me a chart of activities and calories burned. Here’s an example. http://www.nutristrategy.com/caloriesburned.htm Well, being a LAZY OLD GEEK, I decided to monitor my walking electronically. Solution: It was a “long
Arduino Pedometer Continue Reading
This is a beginners project for the Arduino. I am using the Arduino Uno but should work with little or no modification on other arduino models. Setting up the hardware is very easy. This project is more of a training tool for learning how to program a timer list while listening for a button press. Parts
Traffic Lights Beginner Arduino Project Continue Reading
Marble Disorder is a borderline case of Marble Madness 🙂 It simulates a marble maze by sensing the box’s orientation with 2 tilt switches. Stop the press: there’s a new and more intuitive version that doesn’t require the spin knob (See video). I keep documenting the original version below for historical purposes, but don’t watch this –
Marble Disorder – a marble maze simulator with tilt switches using Arduino Continue Reading
NOTE: This Instructable is currently incomplete. I will finish it before September 19. I started this project after seeing Nick Johnson’s Turing Alarm clock. I found that the PIC chip he used was a little too advanced for me, so I decided to use the Arduino microcontroller. The original project by Nick Johnson can be
Turing Alarm for Arduino Continue Reading
This instructable will show you how to make an electronic dice with minimal experience using 7 LEDs, resistors, jumper wires, and of course the arduino (or arduino clone). I wrote this instructable for anyone to easily follow along and learn more about the arduino. Questions are welcome and will be answered as soon as possible.
Arduino Electronic Dice using random numbers Continue Reading
