In this project we will show you how to switch on and off the power sockets box with an IR remote. Not only the power sockets box, but other RF receivers can be switched on and off with the same IR remote as well. We used the RF remote switch library from Randy Simons http://randysimons.nl/ […]
Converting infrared to RF signals with Arduino Read More »
The applications of microcontroller are not limited to control simple electrical or electronic device but they are widely used in robotics and automotive industries nowadays. From simple rear view mirror control to complex engine control functions are done by the microcontroller. The microcontroller can even implement to automatically controlling the vehicle without a human driver
How to Make a Wireless Path Tracking System Using Mouse, XBee and Arduino Read More »
I’m tired of these complicated tutorials on how to use certain things. I like simple, easy to understand, step by step instructions. My biggest problem was with IR and POV*. I’ve finally mastered how to control my project with any TV remote in a few minutes. In this i’ble I’m going to show you simple,
How to Use IR Remotes with Arduino (Current and Updated) Read More »
In this tutorial i will show you , how to make a simple Inexpensive Intrusion Detection(Burglar alarm) using an Arduino Uno board . This project uses the Infrared Emitter-Detector pair to detect intrusion and triggers an alarm as soon as the object crosses the infrared field . ** To see a Similar Project Made with
ARDUINO Burglar Alarm Using Infrared Emitter-Detector pair Read More »
ABSTRACT: There are several places which require vital notice to be displayed like colleges, railway stations, share-market, restaurants, hospitals etc. Looking into the present trend of information transfer, it is seen that vital notice take time to be displayed on the displaying boards. This latency is not anticipated in most of the cases and must
GSM Based Wireless Notice Board Read More »
In this guide I will explain how to use a Windows 8.1 phone, Arduino Uno board, and HC-05 Bluetooth module to build a wireless oscilloscope. The phone application has the critical functions of an oscilloscope, although the bandwidth is a measly 300 Hz. Still, if you want to see squiggly lines on your phone, it
Wireless Arduino Oscilloscope Read More »
The project TiDiGino We developed a new GSM remote control called TiDiGino. The name recalls the initials (TDGxx) of our previous GSM remote control and is also based on the Arduino project. All the details of this circuit can be found below, but no the sketch, because this is your assignment. The contestYou have to write the firmware for this project. The device must perform all the functions
TiDiGino Contest using arduino Read More »
Part 1 – Test Circuit and Test Code Introduction Getting your Arduino to transmit via the radio initially may seem daunting but its actually pretty simple. Please freely substitute the word “Arduino” for any micro-controller you wish to use. The example below works for 5V and 3.3V micro-controllers. Please read this : This may be
Linking an Arduino to a Radiometrix NTX2B Transmitter Read More »
I was going to make a huge write-up on this, but I can’t be bothered right now. I’ll probably do something about it later. Until then, have an Arduino sketch. If you don’t know what you’re doing with it then chances are you don’t have an Arduino, in which case the file is useless to
Xbox 360 RF module + Arduino Read More »
To see how RFM12B wireless compares to other similar wireless options (e.g Xbee, XRF etc..) check out this well compiled comparison overview by Stuart Poulton: http://blog.homelabs.org.uk/wireless-connectivity/. Overview Made by Hope RF, re-branded by RFsolutions in the UK. Sometimes called ‘Alpha RF’ Low cost RF transceiver (from Rapid, Farnell, or RS in the UK) Up to 300m transmission Up
RFM12B – Part 1 – Hardware Overview Read More »
