The following instructable describes a easy to build and inexpensive device to perform pressure measurements and demonstrate Boyle’s law, using the micro:bit in combination with the BMP280 pressure/temperature sensor. Whereas this syringe/pressure sensor combination has already been described in one of my previous instructables, the combination with the micro:bit is offering new opportunities, e.g. for class […]
This is an introduction on how to setup, make a basic connection, and send data to and from an Arduino using Bluetooth! Bluetooth is great for transmitting data over medium distances and what’s more, Arduino just treats it like a serial data connection. This means that we can use the Serial Library. That’s a nice
It’s been a long time since my previous tutorial, my work is quite busy and I spend less time on Instructables. This time is a project that I like very much since my first saw it on Kickstarter: Air Bonsai. I was really surprised at how the Japanese made it, really a beautiful and mysterious piece.
Basically, an overkill soap dispenser made from CNC linear rail Description watch the video first So the goal here was to build a Soap/Sanitiser without using the “servo motor method” this is actually pretty straightforward built, first, you need to print these parts and gather all the electronics components that we need. download parts stl
Recently from few years people have started focusing on modernization. So in this project “SMART PARKING SYSTEM” everything is based on modern idea, and through this project we also tried to short out space related problem which usually occurs in parking. What’s all about the Project? As we know, now the time is changing and
Can a microcontroller control its own power? Well nearly! An ATX power supply, either new or from an old PC, is a great way to power Arduino and other microcontroller projects. That is covered in several ‘ibles such as this one. However, because of some of the special features of an ATX, we can use
DIY your own Arduino UNO with the JLC PCB Description Schematic of ARDUINO S3v3 Details of ARDUINO S3v3 X1: DE-9 serial connector Used to connect a computer (or other devices) using RS-232 standard. Needs a serial cable, with at least 4 pins connected: 2, 3, 4, and 5. Works only when JP0 is set to
Description Hey everyone What’s up! Let me show you something COOL! A completely 3D Printed Mini Air Cooler that is powered by a Jet Turbine. So the goal here was to make a small but powerful Air Cooler that utilizes water to cool down air that is fed by a Jet Turbine. In this post, I’m going
3D Printed Mini Air Kooler (the OverEngineered Edition) Continue Reading
It is a disruptive fitness solution where we classified different physical motions and body positions using arduino nano ble sense. Description TinyML fitness band using “EDGE IMPULSE” is a disruptive fitness solution where I classified different physical motions and body positions using arduino nano ble sense. With the support of Edge Impulse, I collected data
ARDUINO NANO BLE SENSE – TinyML FITNESS BAND USING EDGE IMPULSE Continue Reading
An AI Automation glasses to solving problems for the legally blind, low vision, glaucoma and Cataract. Abstract After the successful prototype for the Blind Glass @Blind-targeted AI Glasses Friends and colleagues reached out to me to further develop the project. I was highly motivated and took the path in developing the project although PCB design is
