Image: Today I am make an Arduino OLED Spectrum Analyzer its work with 0 to 3.3v Analog input. This is very smooth and clear Visualization of audio frequencies. This is very important to make an audio spectrum analyser for DVD Music player, IPod, MP3 player and other Music player not only its look good it […]
Arduino OLED Spectrum Analyzer Continue Reading
Are you tired of sorting your m&ms by hand? Looking for a silly way to spend your time and 3D printer filament? Then this is the Instructable for you. This is a project that I built for one of my engineering courses, in which we were challenged to use an Arduino, some basic electrical components,
Arduino M&M Color Sorter Continue Reading
This sketch is used by Exercise: Read Ultrasonic Ranger. Full Source Code The full code is all in one file ReadSonar.ino. // ReadSonar – measure distance using a HC-SR04 or compatible ultrasonic ranger // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms of the BSD 3-clause license as included in LICENSE.
Arduino Sketch Read Sonar Continue Reading
Fruit and vegetable market is a big sector that is worth more than 200 billion euros worldwide, this is expected to grow even more in the next decade due to an increasing healthier lifestyle across different European countries. When fruits and vegetables are sold at the supermarket they are usually exposed in open spaces, anyone
Apple Gripper Continue Reading
This sketch is used by Exercise: Servo Sweep. Full Source Code The full code is all in one file ServoSweep.ino. // ServoSweep – move a servo along trajectories // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms of the BSD 3-clause license as included in LICENSE. // // This program assumes
Arduino Sketch ServoSweep Continue Reading
I’ve been a fan of Commerical Nanoleaf available in the market but their cost is pretty high so I try to make my own version by designing a WS2812B LED strip and connecting three of these strips together in a triangular shape to make a Nanoleaf like setup. The goal here was to make a
PCB NANOLEAF/HEXALEAF Continue Reading
In this instructable, I’d like to share how to build a vertical plotter that can draw texts and images on the blackboard. Let’s getting started. Time-lapse video with hatch fill extension from Inkscape. Step 1: Bill of Materials Main components: 1pcs x Arduino Mega 2560. 1pcs x RAMPS 1.4 Controller. 2pcs x A4988 Stepper Driver Module. 2pcs x Stepper
BLACKBOARD V-PLOTTER Continue Reading
This sketch is used by Exercise: Input Hysteresis. Full Source Code The full code is all in one file InputHysteresis.ino. // InputHysteresis.ino : Arduino program to demonstrate a simple single-state hysteretic response. // Copyright (c) 2014-2015, Garth Zeglin. All rights reserved. Licensed under the terms // of the BSD 3-clause license as included in LICENSE. // The
Arduino Sketch Input Hysteresis Continue Reading
Do you ever find it a hassle to manually level your 3D print bed every time you make a print? Even seasoned 3D printing pros need to level the printbed after every couple prints. We’ve created a device that helps tremendously improve this procedure. This project, codenamed OmniLevel, helps you level your 3D printer bed
3D Print Bed Leveling Tool Using M5StickC Continue Reading
This sketch is an Arduino program which acts as an simplified hardware I/O server using a simple readable message protocol. The intent is to provide an easily modified and extended real-time embedded hardware controller which can interface easily with a non-real-time client running on a laptop or Raspberry Pi. The following documentation was extracted from
Arduino Sketch OneInOne Out ASCII Continue Reading
