Use an Arduino MKR1000 to maintain a constant temperature in a charcoal smoker and allow monitoring over Wifi, Things used in this project Hardware components Arduino MKR1000 × 1 5V Brushless Blower × 1 MOSFET IRF520N Driver Module × 1 100K ohm NTC Thermistors × 1 Breadboard (generic) × 1 Jumper wires (generic) × 1 […]
Temperature Controled Charcoal Smoker Continue Reading
Many fun environmental sensors need a hardware interrupt. With the MKR1000, you no longer need to choose! You get I2C, analog ins too! Things used in this project Hardware components Arduino MKR1000 × 1 MOD-1016 Lightning Sensor × 1 DFRobot MQ-9 Gas Sensor × 1 Adafruit Humidity and Temperature Sensor × 1 Adafruit Pressure/Altitude/Temperature Sensor
Multiple mode Environmental Sensor Deck with MKR1000 Continue Reading
When I was working on the next version of Common Parts Library, I realized that it would be helpful to explain why you might pick one type of passive component over another. We started off by writing “How to Select a Capacitor” last month, and are following it up with a close look at resistors
How to Select a Resistor Continue Reading
This project consists of 2 devices. the first one is wearable and monitors temperature, second one will control the temperature. Things used in this project Hardware components Arduino MKR1000 × 2 SparkFun Logic Level Converter – Bi-Directional × 1 Li-Ion Battery 1000mAh × 1 RGB Diffused Common Cathode × 1 DHT11 Temperature & Humidity Sensor
Controlling Patient’s Fever with Artik & Arduino Continue Reading
I’ve decided to provide a funny Arduino concept thermometer in case its the middle of the night, pharmacies are not working, you are not feeling well and you want to check your body temperature. If you have Arduino by your side, this is a life saver! Components you will need: Arduino Uno/Nano, whatever Some breadboard
Arduino Body Thermometer + LCD I2C Continue Reading
Water quality data monitoring for swimming pools, fish aquarium and more! Things used in this project Hardware components Arduino MKR1000 × 1 Jumper wires (generic) × 1 DFRobot pH Meter × 1 Resistor 4.75k ohm × 1 Temperature probe × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story I.
Water Quality Monitoring Using MKR1000 and ARTIK Cloud Continue Reading
This project is about building a simple weather dashboard using MKR1000 and Losant platform. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Software apps and online services Arduino IDE Losant Platform Story Introduction This project shows you how to make use of MKR1000
Weather Dashboard with MKR1000 and Losant Continue Reading
In this project we will monitor the room temperature using a LDR_NSL19_M51 light dependent resistor (LDR) and 4Duino. The resistance of the LDR varies significantly with ambient light hence it can detect surrounding light intensity changes in real time. In this project 4Duino’s resistive touch display is used as a means for displaying the detected
Build A LDR Sensor Monitoring The Room Temperature Continue Reading
Beekeeping (or apiculture, from Latin: apis “bee”) is the maintenance of honey bee colonies, commonly in hives, by humans. Things used in this project Story Beekeeping (or apiculture, from Latin: apis “bee”) is the maintenance of honey bee colonies, commonly in hives, by humans. A beekeeper (or apiarist) keeps bees in order to collect their
Beekeeping With Arduino Continue Reading
In this project we will quickly create a ‘temperature monitor’ that measures the ambient temperature of a room or an outdoor space. The temperature is measured by TMP35 temperature sensor and is displayed on the 4Duino screen. The data is also sent to Thingspeak IoT platform which enables data logging over a period of time.
WiFi Temperature Sensor featuring 4Duino-24 Continue Reading
