regulator

INFINEON’S TLS715B0NA LDO REGULATOR USES “FLIP CHIP” TECHNOLOGY TO DIFFUSE HEAT

INFINEON’S TLS715B0NA LDO REGULATOR USES “FLIP-CHIP” TECHNOLOGY TO DIFFUSE HEAT

TLS715B0NA V50 – OPTIREG™ Linear Voltage Regulator is a low dropout linear voltage regulator for load current up to 150 mA. An input voltage of up to 40 V is regulated to VQ,nom = 5 V with ±2 % precision. The TLS715B0, with a typical quiescent current of 36 μA, is the ideal solution for systems […]

INFINEON’S TLS715B0NA LDO REGULATOR USES “FLIP-CHIP” TECHNOLOGY TO DIFFUSE HEAT Continue Reading

12V TO 24V @ 1A STEP UP SWITCHING REGULATOR USING LM2585 2

12V TO 24V @ 1A STEP-UP SWITCHING REGULATOR USING LM2585

This is a DC-DC step-up converter based on LM2585-ADJ regulator manufactured by Texas Instruments. This IC was chosen for its simplicity of use, requiring minimal external components and for its ability to control the output voltage by defining the feedback resistors (R1,R2). NPN switching/power transistor is integrated inside the regulator and is able to withstand 3A maximum

12V TO 24V @ 1A STEP-UP SWITCHING REGULATOR USING LM2585 Continue Reading

EXTENDED BATTERY LIFE IN PORTABLE DEVICES WITH NEW LOW IQ LDO

EXTENDED BATTERY LIFE IN PORTABLE DEVICES WITH NEW LOW IQ LDO

Extending battery life in portable devices up to four times longer than traditional ultra-low quiescent (Iq) LDOs, Microchip has announced a linear Low Dropout (LDO) regulator. With an ultra-low Iq of 250nA versus the approximate 1uA operation of traditional devices, the MCP1811LDO reduces quiescent current to save battery life, enabling end-users to recharge or replace batteries less often. The

EXTENDED BATTERY LIFE IN PORTABLE DEVICES WITH NEW LOW IQ LDO Continue Reading

Capacitor Selection is Key to Good Voltage Regulator Design

Capacitor Selection is Key to Good Voltage Regulator Design

Modular DC-DC switching voltage converters (or voltage regulators) are fully integrated devices that take away most of the complexity of power supply design — but not all. One of the key areas that are still left to the design engineer’s discretion is the choice of components for, and layout of, the energy storage and filtering

Capacitor Selection is Key to Good Voltage Regulator Design Continue Reading

Circuit diagram of the temperature based fan speed control and monitoring using Arduino

Beat the Heat: DIY Temperature-Controlled Fan Speed Regulator

This project is an independent fan speed regulator that automatically adjusts the speed of an electric fan based on real-time feedback. The use of embedded system technologies like a microcontroller and closed-loop control architecture enables successful and reliable temperature regulation. The ATMega8/168/328 microcontroller allows for rapid adjustment of fan speed based on real-time sensor information.

Beat the Heat: DIY Temperature-Controlled Fan Speed Regulator Continue Reading

4.4V TO 105V INPUT SYNCHRONOUS STEP DOWN REGULATOR DELIVERS OUTPUT OF 1V TO VIN

4.4V TO 105V INPUT SYNCHRONOUS STEP-DOWN REGULATOR DELIVERS OUTPUT OF 1V TO VIN

The LT7101 synchronous step-down regulator from Analog Devices is a high efficiency, monolithic synchronous step-down dc-dc converter. It uses a constant frequency, average current mode control architecture and operates from an input voltage range of 4.4V to 105V and provides an adjustable regulated output voltage from 1V to VIN while delivering up to 1A of output current. The LT7101

4.4V TO 105V INPUT SYNCHRONOUS STEP-DOWN REGULATOR DELIVERS OUTPUT OF 1V TO VIN Continue Reading

SIMPLE DATAFLASH BOARD PLUGS INTO AN ARDUINO TO PROVIDE 4MBYTES OF EEPROM

SIMPLE DATAFLASH BOARD PLUGS INTO AN ARDUINO TO PROVIDE 4MBYTES OF EEPROM

This is a small board that plugs into one of the headers on an Arduino Uno or other board to provide 4Mbytes of non-volatile storage: It works with either 5V or 3.3V boards, and is based on the low-cost 4Mbyte Winbond W25Q32FVSIG DataFlash chip. It is ideal for applications such as data logging, playing audio samples,

SIMPLE DATAFLASH BOARD PLUGS INTO AN ARDUINO TO PROVIDE 4MBYTES OF EEPROM Continue Reading

INFINEON CLAIMS INDUSTRYS FIRST TRUE 1000A VOLTAGE REGULATOR FOR AI

INFINEON CLAIMS INDUSTRY’S FIRST TRUE 1000A VOLTAGE REGULATOR FOR AI

Adding to its high current system chipset portfolio, Infineon claims to offer the industry’s first 16-phase digital PWM multiphase controller. The XDPE132G5C extends the existing portfolio which enables currents of 500 to 1000A and above for next generation CPUs, GPUs, FPGA and ASICs used in artificial intelligence (AI) and 5G datacomms applications. It has been introduced as

INFINEON CLAIMS INDUSTRY’S FIRST TRUE 1000A VOLTAGE REGULATOR FOR AI Continue Reading

Scroll to Top