Most notable for its inclusion in the Kindel and other E-Readers, E-Paper has recently become very popular. But until very recently been out of reach to being used in personal projects. Luckily for us, SparkFun started selling and E-Paper display, and breakout board finally bringing this great technology to a place where we can slap […]
A Slow Display… E-Paper + Arduino Read More »
A Liquid Crystal Display commonly abbreviated as LCD is basically a display unit built using Liquid Crystal technology. When we build real life/real world electronics based projects, we need a medium/device to display output values and messages. The most basic form of electronic display available is 7 Segment display – which has its own limitations.
Interfacing LCD to Arduino – Display Text and Characters on LCD Screen using Arduino Read More »
Get acquainted with using I2C with the Quark D2000 development board by interfacing an ambient light sensor and an LCD. Previously, we presented a general overview of the Quark D2000 development board. Subsequently, we explored the use of the board’s GPIO and PWM. In this project, we will explore using I2C with the D2000 board
Quark D2000 I2C Interfacing: Add a Light Sensor and an LCD Read More »
In this tutorial we’ll be looking at how to connect interface parallel LCD to an Arduino. We are using 16 char x 2 Line LCD known as 16×2 LCD, you can usually identify this display by the 16-pin interface. You only need to solder 10 of the 16 wires to use the LCD, but this will
LCD interfacing with arduino Read More »
Signal and power from the same voltage source Most hobby electronics store carry cheap and ready to use digital voltmeter modules (DVM) the problem with those is that they do usually require an independent power source to power the DVM-module. Many circuits are made such that you have one power supply and you would like
Programmable 8-character LCD module and digital voltmeter Read More »
So recently I got a Raspberry pi and a 16×2 character LCD screen , I thought , lets make a simple game that can be played on the lcd. my first instinct was to code directly for the lcd on the pi , but as I started coding I realized that the clutter of having
Writing a python module to simulate a LCD Read More »
As a simple first Arduino experiment I interfaced a two line LCD (a Displaytech 162B) and an LM35DZ to make a simple Min/Max thermometer. Step 1 – Interfacing the Temperature Sensor This is really very simple. The LM35DZ has three pins, +5V, ground and a variable voltage output to indicate the temperature. I plugged it
A Simple Arduino LCD Min/Max Thermometer Read More »
Today, we are going to Interface 2.4 inch TFT LCD Shield with Arduino. By using this color TFT LCD shield we can show characters, strings, blocks, images etc on the color TFT LCD. And we can use this TFT Shield in many applications like: Security System, Home Automation, Games etc. Interfacing TFT LCD with Arduino
Interfacing TFT LCD with Arduino Read More »
To establish a good communication between human world and machine world, display units play an important role. And so they are an important part of embedded systems. Display units – big or small, work on the same basic principle. Besides complex display units like graphic displays and 3D dispays, one must know working with simple displays
Interfacing 16×2 LCD with Arduino Read More »
Welcome to my FIRST instructable, i will show you how to connect a 16×2 lcd display to an arduino, follow these simple step by step instructions and you will have it done in no time 🙂 Tools Needed : Soldering Iron Wire Strippers Pliers Soldering Iron Flux ( Liquid Or Solid ) Soldering Iron
Connect A 16×2 LCD Display To An Arduino Read More »
