This instructable was designed for beginners in mind, but advanced users can easily adapt it to fit their needs and wants. It only uses a few common components, so you shouldn’t have much trouble putting this together. It’s a good waste of 5 minutes with a satisfying result (at least in my experience), and everything […]
In this project I am controlling my three automation projects using single application made by me using MIT app inventor platform. Description As we all know that the world is slowly shifting towards automation, we require automation everywhere, like in industries, factories, houses, energy management systems etc. and also it is very important for us
CONTROLLING MY THREE AUTOMATION PROJECTS USING SINGLE MOBILE APPLICATION Continue Reading
I bought a solar powered garden light. The solar panel charges the batteries and when it gets dark the lights (3x LEDs) turn on until it either gets lights again or the batteries run out. It has a small amount of intelligence (turns on when dark off when light) but not enough! Time for some
Intelligent Solar Garden Light using an Arduino- Part 1 Continue Reading
The Arduino Yún is a curious addition to the Arduino family. There is a fairly widespread community surrounding the Arduino concept, platform and software. There’s another popular community dedicated to hacking and improving inexpensive wireless routers, which often run Linux. The Yún combines the two…it’s basically an Arduino Leonardo housed on the same PCB as
Kickstarter Backer Alert with Stats Scroller, using Arduino Yun Continue Reading
An Embedded Machine learning-based project was used to detect fire using the inbuilt colour sensor. Description It’s an embedded machine learning-based project used to predict a fire in Arduino nano ble 33 sense with the help of the inbuilt color sensor attached to the board and if the fire has been detected a buzzer is
Fire Prediction using Arduino nano BLE sense and Machine Learning Continue Reading
After making a 8X10 matrix a lot of people asked me about expanding the matrix to some thing bigger, and some wanted to write stuff to the matrix via a PC, so one day I looked at a pile of LEDs that I had leftover from a LED cube projected and I decided to make
For a party we were about to have I wanted a cool light display to use with my new Xmas present – an Arduino Uno. Having looked at the LED matrix’s here I wanted a bigger one that I could hang on the balcony. I also wanted it to interact with music and flash at different sound
In this, I will tell you how to connect two 16*2 LCDs together with a single Arduino. This is a very unique project. you can’t find this anywhere. Description Introduction In this project, I will tell you that how to connect two LCDs together with the help of Arduino only. When I was starting this
How to connect two 16×2 LCD together with arduino Continue Reading
An interesting project of making a Digital Clock using Arduino UNO without the help of RTC Module. Description AIM To build a Digital Clock at Low Cost (Without using any External RTC Module) ject, I have used LCD 16X2 Display , an Arduino UNO , a 4×4 keypad and Arduino UNO v5.0 Shield to proceed
Digital Clock using Arduino UNO Without RTC module Continue Reading
I’m going to show you how to use your Arduino to control up to 12 servos at once with minimal jitter. Using a simple serial interface you can control the position of up to 12 servo channels. Up to 10 snapshot positions can be saved and played back at any time. Start up values for
