News & Updates

Kobol’s Open Spec Helios4 NAS SBC Features 4x SATA 3.0 Ports

Kobol’s Open-Spec Helios4 NAS SBC Features 4x SATA 3.0 Ports

Electronics News Updates / By

Singapore-based startup Kobol has successfully launched its open-spec “Helios4” NAS (network-attached storage) SBC and fanned system. In May 2017, Kobol tried to launch the open-spec Helios4 SBC and fan-equipped system for NAS on Kickstarter. Though a total of 337 backers helped to raise $74K for the Helios4, Kobol fell short of its $110K funding goal. The Helios4 NAS SBC […]

Kobol’s Open-Spec Helios4 NAS SBC Features 4x SATA 3.0 Ports Continue Reading

iBase extends to ARM with the Launch of the Pico ITX IBR115 and the IBR117

iBase extends to ARM with the Launch of the Pico-ITX IBR115 and the IBR117

Electronics News Updates / By

iBase, an industry leader in embedded solutions and services has now unveiled a new SBC that targets the ARM market. The new SBCs (Single Board Computer) launch will make a new shift for iBase from its traditional Intel-based SBC such as their recent Apollo Lake driven IB818. These new set of SBCs are called the

iBase extends to ARM with the Launch of the Pico-ITX IBR115 and the IBR117 Continue Reading

Automated Point to Point Model Railroad With Yard Siding

Automated Point to Point Model Railroad With Yard Siding

News & Updates / By

In this post, we will discuss Automated-Point-to-Point-Model-Railroad-With-Yard-Siding: Arduino microcontrollers open great possibilities in model railroading, especially when it comes to automation. This project is an example of such an application. It is a continuation of one of the previous projects. This project comprises of a point to point model railroad layout with a yard siding

Automated Point to Point Model Railroad With Yard Siding Continue Reading

How to Build Your Own Anemometer Using Reed Switches Hall Effect Sensor and Some Scraps on Nodemcu Part 2 Software

How to Build Your Own Anemometer Using Reed Switches, Hall Effect Sensor and Some Scraps on Nodemcu – Part 2 – Software

News & Updates / By

In this post, we will discuss How-to-Build-Your-Own-Anemometer-Using-Reed-Switches-Hall-Effect-Sensor-and-Some-Scraps-on-Nodemcu-Part-2-Software: This is the sequel to the first post “How to Build Your Own Anemometer Using Reed Switches, Hall Effect Sensor and Some Scraps on Nodemcu – Part 1 – Hardware“ – where I show how to assemble the wind speed and direction measurement devices. Here we will exploit

How to Build Your Own Anemometer Using Reed Switches, Hall Effect Sensor and Some Scraps on Nodemcu – Part 2 – Software Continue Reading

Scroll to Top