Electronics News Updates

Signal Generation with MATLAB. Example of DTMF in telephony

Signal Generation with MATLAB. Example of DTMF in telephony

In mathematics a signal is a real function of a real variable f(t). In electronics it represents the evolution of a voltage (or a current) over the time and depends on the performances of the stage of the amplifier. Through a memory buffer, samples move to a digital-to-analog converter that produces a voltage signal, after

Signal Generation with MATLAB. Example of DTMF in telephony Continue Reading

SiTime enters wearables IoT markets with 32 kHz MEMS TCXO

SiTime enters wearables, IoT markets with 32 kHz MEMS TCXO

I recently spoke to Piyush Sevalia, Executive Vice President, Marketing at SiTime Corporation,about their newly introduced 32 kHz TCXO (temperature compensated oscillator) which they claim to be the smallest, lowest power device in the industry. With its tiny footprint and ultra-low power consumption, the SiT1552 MEMS TCXO decreases the size and increases battery life of

SiTime enters wearables, IoT markets with 32 kHz MEMS TCXO Continue Reading

SK Hynix Introduces Industry’s Highest 72 Layer 3D NAND Flash

SK Hynix Introduces Industry’s Highest 72-Layer 3D NAND Flash

SK Hynix Incorporated introduced the world’s first 72-Layer 256Gb (Gigabit) 3D (Three-Dimensional) NAND Flash based on its TLC (Triple-Level Cell) arrays and own technologies. This company also launched 6-Layer 128Gb 3D NAND chips in April 2016 and has been mass producing 48-Layer 256Gb 3D NAND chips since November 2016. Within 5 months the researchers in SK

SK Hynix Introduces Industry’s Highest 72-Layer 3D NAND Flash Continue Reading

SMALL FORM FACTOR BOARD HAS COMPUTING POWER FOR MEDICAL AND IOT

SMALL FORM FACTOR BOARD HAS COMPUTING POWER FOR MEDICAL AND IOT

Populated with the Intel Core i5 7300U and i3 7100U processors, the WUX-7x00U is a small form factor (SFF) embedded board by Portwell. The processors, formerly codenamed Kaby Lake, integrate the low power Intel Gen. 9.5 HD Graphics, 620 graphics engine with 24 execution units, enabling enhanced 3D graphics performance and higher speed for 4K encode and

SMALL FORM FACTOR BOARD HAS COMPUTING POWER FOR MEDICAL AND IOT Continue Reading

SMART.IO An Affordable Remote Control for Embedded Designs

SMART.IO, An Affordable Remote Control for Embedded Designs

Creating a smartphone application for your embedded products may be a high-cost process that consumes time and efforts. ImageCraft, a producer of high quality low cost embedded system tools, had developed “Smatr.IO” as a very cheap alternative solution that allows you to add a friendly user interface to any embedded project. Smart.IO is a toolkit

SMART.IO, An Affordable Remote Control for Embedded Designs Continue Reading

Choosing 1 sound card for DC capable low speed oscilloscope

Choosing $1 sound card for DC-capable low speed oscilloscope

This USB sound card that presents itself as C-Media is one of the cheapest sound cards available with price $1.1-$2 depending on vendor. Device markings: HX2010-0705, production date 40th week of 2013 (or later?). Device enumerates as composite device: sound card + HID input. HID input part is used for audio volume and mute control

Choosing $1 sound card for DC-capable low speed oscilloscope Continue Reading

ChipStomp – A Digital effects pedal built with a ChipKit DP32

ChipStomp – A Digital effects pedal built with a ChipKit DP32

Here’s something I’ve been working on for a while.  It’s a digital guitar effects processor based on a PIC32MX. It started with a conversation with my brother John. We were playing with my mini drum-machine, using the tune mode to mash the hell out of the samples whilst running it though his bass guitar amp

ChipStomp – A Digital effects pedal built with a ChipKit DP32 Continue Reading

Scroll to Top