Bluz Grill Thermometer
With summer arriving, and the fear of dried out chicken looming, we wanted a more high tech way to track the temperature of items we are grilling outside. There are wireless probe thermometers, but they require carrying around a separate readout. We wanted a way to read the termperature from our smartphone, so we took the just the thermometer and hooked it to bluz!
Getting the thermometer to work was a bit of an experiment. The thermometer itself is a thermistor, which means the resistance changes with temperature, but not in a linear way. To get around this, we followed some advice in this article and added a second resistor in parallel. We had to measure the thermistor without the parallel resistor first to find the proper range. Then we added the resistor and measured various temperature points to create a linear function to determine the temperature based on the measured voltage.
Once we had the proper resistance, we hooked one end to 3.3V and the other to a pull-down resistor and measured the voltage in the middle. We managed to calibrate it further by experimenting with the provided digital read-out.
To make the circuit for the probe thermometer, we used the bluz Proto Mini shield. We soldered on a 2.5mm stereo headphone jack as that is what the probe thermometer used. Then we just soldered the rest of the resistors in place. The Proto Mini shield made this super easy.
Once everything is hooked up, just start the node.js server and open the webpage.
Read more: Bluz Grill Thermometer
This Post / Project can also be found using search terms:
- arduino grill thermometer
- arduino ktype grill thermometer