Solar powered wireless Arduino based Geiger counter porject.

Hello,

I have plans to build myself a solar powered wireless Geiger counter using a RH Electronics Arduino IDE Geiger counter connected via a serial connection through a logic level converter to a 3.3V ATmega328P-AU Pro MCU with an ESP8266 serial WiFi tranceiver to send the readings from the Geiger counter to radmon.org.I intend to connect the hardware together something like this,


#include <SPI.h>

#include <Ethernet.h>

byte mac[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; // MAC ADDRESS OF YOUR ETHERNET ADAPTOR

IPAddress ip(192,168,0,5);  // YOUR IP

IPAddress server(82,165,208,105); // RADMON.ORG IP, CHECK THIS

EthernetClient client;


void init_ethernet()
{
    // give the ethernet shield a second to initialize:

    delay(1000);

    Ethernet.begin(mac, ip);

    delay(1000);
}

void connect()

{

    if (client.connect(server, 80))

    {

        client.print("GET /radmon.php?function=submit&user=");

        client.print(UserName); client.print("&password=");


        client.print(PassWord); client.print("&value=");


        client.print(int(f_value[CPM]));

        client.print("&unit=CPM");

        client.println(" HTTP/1.0");

        client.println("HOST: radmon.org");

        client.println();

    }
else

    { // you didn't get a connection to the server: }
}