Thermal Camera records infrared images that the human eyes can’t see which can give it a niche use for different applications. A thermal camera is great of observing the temperature variation of an object and it has application in the health, security, electronics, animal and several industries. The most critical parameter for the thermal camera is […]
HT-102 – A THERMAL CAMERA ON A BUDGET Continue Reading
Posifa Technologies today announced its new PAV1000 series of air velocity sensors for data center thermal management and HVAC applications such as filter monitoring . Measuring air velocity at 7 m/s (PAV1005V) and 15 m/s (PAV1015V), the devices offer extremely fast response times of 125 ms typical in a compact, robust package. The PAV1000 series was designed as
NEW AIR VELOCITY SENSORS FOR DATA CENTER THERMAL MANAGEMENT Continue Reading
Micron 9200 NVMe™ Solid State Drives (SSDs) comes under Micron’s flagship performance product line and the second generation of NVMe drives. These SSDs utilize Gen3 PCIe interface, innovative non-volatile memory express protocol, and Micron’s high-speed NAND to provide high-throughput and IOPS, low-latency, and consistent quality of service. The 9200 SSDs are available in high-capacities up
MICRON’S 11TB NVME SSDS NOW AT MOUSER Continue Reading
Compulab is introducing Airtop3 – a ruggedized small-form-factor fanless IoT edge server powered by an 8-core Intel® Core™ i9-9900K Processor and Nvidia Quadro RTX 4000, both passively cooled using Compulab’s Natural Airflow technology. With a footprint of just 7.5 liters, Airtop3 can passively dissipate up to 300W and operate at a wide temperature range of -40°C to 70°C.
COMPULAB AIRTOP3 IS BRINGING PERFORMANCE TO THE EDGE Continue Reading
Littelfuse, Inc. today introduced two second-generation series of 650V, AEC-Q101-qualified silicon carbide (SiC) Schottky Diodes. The LSIC2SD065CxxA and LSIC2SD065AxxA Series SiC Schottky Diodes are available with a choice of current ratings (6A, 8A, 10A, 16A or 20A). They offer power electronics system designers a variety of performance advantages, including negligible reverse recovery current, high surge capability,
ODROID-N2 is a new generation single board computer that is more powerful, more stable, and faster performing than ODROID-N1. The main CPU of the N2 is based on big.Little architecture which integrates a quad-core ARM Cortex-A73 CPU cluster and a dual core Cortex-A53 cluster with a new generation Mali-G52 GPU. Thanks to the modern 12nm silicon technology, the A73 cores runs at 1.8Ghz without
ODROID-N2 SBC LAUNCHES AT $63 WITH NEW CORTEX-A73 SOC Continue Reading
Proper reflow oven maintenance can extend its life cycle, keep the machine in good condition, and improve production efficiency and product quality. One of the most important tasks for properly maintaining a reflow oven is remove the built-up flux residue inside the oven’s chamber. Although there is a flux collection system in modern reflow machines, there still is a
HOW TO MAINTAIN A REFLOW OVEN? Continue Reading
The MLX90641 is a 16×12 pixel IR array housed in an industry standard 4-lead TO39 package and is able to accurately measure temperatures in the range of -40 °C to +300 °C. The factory-calibrated devices ensure an accuracy of 1 °C in typical measurement conditions. The high accuracy is further supported by a Noise Equivalent
MLX90641 – Far infrared thermal sensor array with 16x12px resolution Continue Reading
Thermal Imaging Solution for Electronics Testing The FLIR ETS320 is the first true electronic test bench camera, designed for Quick temperature checks on PCB boards and electronic devices. The FLIR ETS320 is sensitive enough to detect subtle temperature differences with an accuracy of ±3°c, so you can quickly find hot spots and potential points of
FLIR ETS320 Thermal Imaging Solution for Electronics Repair Continue Reading
Very often, particularly on the Internet, we’re fooled into thinking bigger is always better. The fact remains that this isn’t always the case. When it comes to reflow ovens, for example if you’re working with short runs of small PCBs, or if you just don’t have a lot of space in the workshop, a smaller
BUILDING A COMPACT REFLOW OVEN WITH HALOGEN LAMPS Continue Reading
