The Internet of Things has brought a lot of formerly complex device applications into the homes of many craft brewers and wine makers. Applications with level sensors have been used for decades in large refineries, water treatment plants, and chemical plants. With sensor prices falling, now both industrial and DIY can monitor the volume of […]
Build a Tank Volume Reader in Under $30 Using ESP32 Read More »
This is Tahir Ul Haq and introduces you to another member in the family. This time the project is named as Weather Monitoring System. This is another TIVA based project presented by students of UET LHR. Weather monitoring plays an important role in human life, so the collection of information about weather changes is very
Have you ever wanted to make a line following robot but the infrared sensors were too expensive for you? Do you want to upgrade the robot in my other instructable? Well this instructable comes in two stages, Stage 1 is the prototyping stage, where you build the circuit on the bread board and debug it
e-con Systems Inc., a leading embedded camera solutions company, today announced the launch of e-CAM50_CUCRL, a 5 MP camera board for Coral development kit from Google. e-CAM50_CUCRL houses e-con’s popular e-CAM55_CUMI0521_MOD camera module and can be directly plugged on to the Coral development kit using the supplied accessories. The camera software driver is V4L2 compliant and is available
E-CON SYSTEMS LAUNCHES CAMERA SUPPORT FOR GOOGLE CORAL DEVELOPMENT BOARD Read More »
The official Arduino development team have this week at CES 2023 launch their latest creation in the form of the Arduino Pro Nicla Voice. Specifically created to provide developers and users with onboard Bluetooth Low Energy connectivity and a board that is compatible with existing Nicla, Portenta, and MKR hardware. The tiny Nicla Voice Arduino board is equipped with a
My basement gets wet when it rains a lot so I wanted a way to monitor it. I decided to try using an ESP8266 as it has built in WiFi. I paired that with a DHT22 Humidity & Temperature Sensor and a float sensor to monitor my sump pump. Using the ESP8266 is easy enough
The goal of this project is to build a cheap alternative to measuring CO2 ppm in the air. It’s a nice simple way to see over-time change in ppm using a cheap NDIR carbon sensor and a temperature/pressure sensor to achieve better accuracy. In this project you will need to: – Solder – Wire –
ONiO, a Norwegian healthcare-focused Internet of Things (IoT) expert has unveiled ONiO.zero, an ultra-low-power RISC-V-based microcontroller capable of operating solely from harvested energy — without needing a battery, capacitor, or any other means of energy storage. The company says “ONiO.zero is an ultra-low-power wireless MCU that uses energy harvesting technology.” This indicates that the ONiO.zero solely functions on energy harnessed from its surroundings. With
ONIO.ZERO RISC-V MICROCONTROLLER FUNCTIONS ON HARVESTED ENERGY Read More »
The TR pcb mountable pressure transducer series from Merit SensorTM is a rugged, direct-media pressure monitoring solution designed for today’s toughest pressure sensing environments. This pressure transducer series offers a pressure range from 15psi to 500psi with a fully compensated amplified output. The TR series from Merit SensorTM is designed for air, liquid and gas harsh media
The Particle Photon is a microcontroller suitable for wearable project’s considering it’s small form factor and that it supports OTA updates. For those of you who do not know what a Particle Photon is it is a tiny microcontroller with on board WiFi (Cypress WiFi chip) and the STM32 ARM Cortex M3 microcontroller, which is ideal for cool
Particle Photon – Wearable Pulse and Temperature Sensor Read More »
