An Embedded Machine learning-based project was used to detect fire using the inbuilt colour sensor. Description It’s an embedded machine learning-based project used to predict a fire in Arduino nano ble 33 sense with the help of the inbuilt color sensor attached to the board and if the fire has been detected a buzzer is
Fire Prediction using Arduino nano BLE sense and Machine Learning Continue Reading
Some time ago, I tried to make an “Instructables Hit Counter” using the Instructables API, and an Arduino Uno with a wired network shield. However, with the limited RAM of the Arduino Uno, I was unable to get the system to work. A while ago, I noticed a similar project done by diytronics using a NodeMCU. This was just
Instructables Hit Counter (ESP8266-01) Continue Reading
OK So my third Instructable and here we’re dealing with another Sonoff device, the original Sonoff WiFi smart switch. Theses devices are again based around the ESP8266 and are easily hacked. The devices can switch up to 10A @ 240V so are ideal for switching lights, TV’s, games consoles etc. Please don’t try running a
Hacking a Sonoff to Work With Home-Assistant and MQTT Continue Reading
There are some great hackable devices in the SONOFF range such as the original SONOFF switches, the Slampher and the SONOFF Luxury wall plate which is the subject of this instructable. These devices are based around the ESP8266 or ESP8285 WifFi modules and are easily hackable. I’ll only cover here how to convert a wall
Hacking a Sonoff Touch Panel to Work With MQTT and Homeassistant Continue Reading
The ESP8266 ESP-01 is a module for Wi-Fi that enables microcontrollers to connect to a Wi-Fi network. This module is an independent SOC (System On a Chip) that does not require a microcontroller for managing inputs and outputs like you would typically do with an Arduino, as the ESP-01 functions as a miniature computer. It
Getting Started With the ESP8266 ESP-01 Continue Reading
In my previous project i have made an infinity gauntlet that control a light switch. I wanted to use six stones and each stone can control appliance, door lock, or lighting.So, I made a home automation system using infinity gauntlet. In this project I used the RF24Network Library, which enables to build a wireless network with many
Infinity Gauntlet Controlled Home Automation Continue Reading
Get ready to create distributed sensor systems and intelligent interactive devices using the ZigBee wireless networking protocol and Series 2 XBee radios. By the time you’re halfway through this fast-paced, hands-on guide, you’ll have built a series of useful projects, including a complete ZigBee wireless network that delivers remotely sensed data. Radio networking is creating
Introduction In the realm of telecommunication and computer networks, the application of Dual Tone Multi-Frequency (DTMF) technology has extended beyond traditional telephony into diverse fields, including industrial automation and control systems. One intriguing application of DTMF technology is in the speed regulation of DC motors. This project, titled “Speed Regulation of DC Motor Using DTMF
The Raspberry Pi 3B+ (as well as all other Raspberry Pi models currently available) comes equipped with built-in WiFi functionality. The “wlan0” interface serves as the default connection gateway alongside Ethernet, yet it lacks the capability to enter “monitoring mode.” In this guide, we’ll demonstrate the steps to ensure that a separate network adapter is
Harnessing Monitoring Capabilities: Rasp Pi 3B Network Adapter Continue Reading
By popular request this is a new wireless version of the Visual Network Threat Level Indicator. This uses a Roving Networks WiFly RN-XV Module to do 802.11 WiFi along with an Arduino to display the threat level on your network. Network monitoring is very important in todays world. The internet is a scary place. People have taken
Visual Network Threat Level Indicator v2 using Arduino Continue Reading
