Pretty much. I was born in the nineties, and the first personal computer my family bought (a $3000 screamer with a 300 MHz Pentium II, 256 MB of RAM, and the optional Boston Acoustics speaker system) ran Windows 95. Also, this isn’t the first time I’ve installed an old operating system on a watch. Here’s […]
Windows 95 on an Apple Watch Continue Reading
In this article, we are publishing a project which explains different aspects of interfacing a Stepper Motor with Arduino. Stepper motor is a specially designed DC motor which comes with advantages of both a servo motor and a normal dc motor. Compared to a normal Dc motor, the maximum rpm a stepper motor can produce
Interfacing Stepper Motor to Arduino Continue Reading
In this article, we are publishing a project which explains different aspects of Arduino-Gear motor interface. Gear motor is a specially designed DC motor whose gear assembly helps in increasing the torque and reducing the speed. Compared to a normal DC motor, maximum rpm a gear motor can produce is less. But they have the
Arduino Gear Motor Interface Using IC L293D Continue Reading
A stepper motor shakes a limb to frighten away birds and squirrels. It is under the control of the MKR1000. Things used in this project Hardware components DC motor (generic) × 1 Arduino MKR1000 × 1 Story The project uses a stepper motor to pull down on a fig tree limb to frighten away birds
Speed control of DC motor with PC Interface is an easy DIY project. In this project DC motor’s speed is controlled by sending the command through PC. Arduino is directly connected to PC through the USB cable and command is given to Arduino on serial monitor of the Arduino IDE. Motor is connected to a
DC Motor Speed Control Using Arduino & PWM Continue Reading
Automating a chicken coop with sensors and actors, using an Arduino MKR1000 and the Blynk internet dashboard. Things used in this project Hardware components Arduino MKR1000 × 1 CHIHAI DC Motor – 12V 200rpm Encoder with Mounting Bracket × 1 Geekcreit L298N Dual H Bridge Stepper Motor Driver Board For Arduino × 1 Photo resistor
Chicken Coop Automation Continue Reading
Hello friends, I hope you all are doing great. In today’s tutorial, we are gonna design a project named DC Motor Control using XBee & Arduino in Proteus ISIS. I have shared the complete code and have also explained it in detail. You can also download the complete working Proteus Simulation given at the end
DC Motor Control using XBee & Arduino in Proteus Continue Reading
In this project, we will control the angular position of the DC Servo Motor via an I/O port (with PWM output capability) and touch knob. The 4Duino resistive touch display is used as a means for a graphical interface to control the angular position of the Servo. Servo motor is a very useful device for
Servo Control Using 4Duino Continue Reading
As a rabbit person, Easter is my favorite holiday, but plain old Easter baskets can get old. Things used in this project Story As a rabbit lover, Easter has always been my favorite holiday. However, the classic Easter basket just isn’t that exciting. In this project, you add a remote controlled surprise with an Arduino
Arduino Easter Suprise Continue Reading
In this project, we will learn how to control the speed and direction of a DC motor via I/O ports with PWM output capability, a L293D quad half-h drivers IC and 4D Workshop widgets. In its simplest form, a DC motor has two wires which is connected to a power supply. Depend on whichever way
DC Motor featuring 4Duino-24 Continue Reading
