This instrcutable will show you how to hook up LEDs to show a face of a dice when a pushbutton is pressed. Step 1: Supplies For this project you will need to following: 11 long jumper wires 7 short jumper wires 7 LEDs 1 breadboard 1 Arduino Uno 1 USB cable for the Arduino 1
Easy Arduino LED Dice Continue Reading
In this instructable, I have used the DHT11 Temperature & Humidity sensor & Arduino UNO to display the current temperature & humidity readings into a 16 x 2 LCD Display. Alongside, I have also created a 3-LED setup which indicates 3 sets of temperature readings (cold, hot, extreme). The DHT11 is a digital sensor that lets you easily get relative humidity and
Temp & Humidity Sensor With LCD Disp & LED Indicator Continue Reading
In our previous tutorial, we learned how to set up the ESP8266 ESP-01 and establish communication with other devices. In this tutorial we are going to show how to use the ESP-01 module to give the Arduino UNO access to a Wi-Fi network and interact with inputs and outputs. Step 1: Materials The materials that you will need for this tutorial are: Jumper Wires
Using ESP-01 and Arduino UNO Continue Reading
Let’s learn how to read a potentiometer, a type of rotating variable resistor, using Arduino’s analog input! We’ll connect up a simple circuit using a solderless breadboard and use some simple Arduino code to control a single LED. So far you’ve learned to control LEDs with Arduino’s output, and you learned to detect a pushbutton’s state (on
Read a Potentiometer With Arduino’s Analog Input Continue Reading
In this instructable you will learn how to communicate between Arduinos over a long distance up to 1.8km in open air. The HC-12 is a wireless serial port communication module that is very useful, extremely powerful and easy to use. First you will learn how to make a wireless instant messenger with the least effort
Long Range, 1.8km, Arduino to Arduino Wireless Communication With the HC-12. Continue Reading
This instructable is the written version of my “Arduino – Sound Sensor (with LED)” YouTube video that I’ve uploaded recently. I strongly recommend you to check it out. My YouTube Channel Step 1: Tutorial Sound sensors can be used for a variety of things, one of them could be turning lights off and on by
Arduino – Sound Sensor (with LED) Continue Reading
Donation boxes can be much more interesting and attractive when you combine them with electronics and a little bit of programming. This instructable will show you how to. As the name explains, making donation boxes interactive can help you gain much more attention and make people happy at the same time! Indeed, and awesome way
The Interactive Donation Box Continue Reading
Hello, everybody!!! It has been some time I had not updated my post here. Today I would like to share with you guys an experiment I made. I am going to control LEDs using MIT app inventor speech recognizer. Oh before I forget, I had also started a blog where I post some other Arduino
Voice to Arduino: Control LEDs Using MIT Speech Recognizer Continue Reading
Designing a Mini BillBoard using LED Lights(different colors) , Arduino and Bread Board. Thought of creating a mini billboard, that could display my name (“Josh”) . This is for one of the build nights (required us to use LED lights). This billboard would blink in out josh several times just like any big billboard. Here
Mini BillBoard Continue Reading
You wan’t do a dark sensor with a LDR, one transistor and one LED and you don’t know how to do it? In this small tutorial I will explain to you how you can do that even if you know only the basics of electronic. Parts you need: 1 Breadboard; 1 Power source of 12v;
Dark Sensor With LDR, Transistor and a LED Continue Reading
