The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications. It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement. This design allows for an ultralow power analog-to-digital converter (ADC) or an embedded […]
ADI aims ECG chip at consumer health monitors Continue Reading
The ADuCM360 is a fully integrated, 3.9 kSPS, 24-bit data acquisition system that incorporates dual high performance, multichannel sigma-delta (Σ-Δ) analog-to-digital converters (ADCs), a 32-bit ARM Cortex™-M3 processor, and Flash/EE memory on a single chip. The ADuCM360 is designed for direct interfacing to external precision sensors in both wired and battery-powered applications. The ADuCM361 contains
ARM Cortex M3 plus 24bit DACs for 4-20mA loops Continue Reading
Description MAX44000 combines a wide-dynamic range ambient light sensor with an integrated infrared proximity sensor, making it a perfect solution for touch-screen portable devices. MAX44000 consumes as little as 11µA (time averaged) in ambient light sensing plus proximity sensing, including external IR LED current. The on-chip ambient light sensor is capable of wide dynamic range
Ambient light includes IR sensor for mobiles proximity detection Continue Reading
Description The CC115L is a cost optimized sub-1 GHz RF transmitter. The circuit is based on the popular CC1101 RF transceiver, and RF performance characteristics are identical. The CC115L value line transmitter together with the CC113L value line receiver enables a low cost RF link. The RF transmitter is integrated with a configurable baseband modulator.
For my first project with Particles’s Spark Core, I decided to make an internet-connected stuffed animal! After close consideration, I settled upon a blue and green alien to be the body of this project (see the above picture.) Powered by a Spark Core, this other-worldly being lights up and buzzes whenever my cousin receives an
A friend gave me one of Adafruit’s circuit playgrounds (developer edition) to use, and I wanted to see would it make a good robot controller. The circuit playground is packed full of features like sensors, neo-pixels and even an accelerometer. I wanted to add a L9110 motor controller and create a small bot I could
Adafruit’s Circuit Playground As a Robot Controller With Bluetooth Continue Reading
We always need to see the temperature and humidity when we sitting in our house to know whether we need to turn on/off AC, heater,cooler,etc. So here we have build this circuit to display temperature and humidity on the 7-segment displays, and we have used DHT22 to bring out the temperatures and humidity and a
Temperature and Humidity Monitor Using DHT22 & MAX7219 Continue Reading
This Instructable covers the assembly of a circuit capable of PWM-ing (pulse width modulating) a high-power RGB LED strip and programming an Arduino to cycle through a range of colors. In this context, “high power” is 9-12 volts. I will discuss how to mount a transistor to a heatsink and assemble the circuit. I will
Printed Circuit boards are an important part of the development of any electronics product. They provide an easy, neat and repeatable ways of connecting components together. Thus, ensuring quality from their design to production is so critical that, failure at any point in the process could lead to a lot of money going to waste
ir2110 circuit in proteus ir2110 proteus library ir2110 arduino code ir2110 h bridge circuit here is the simple motor contrrol circuit using H Bridge and ir2110 ic Components Required Simulation of three phase cascaded H-Bridge Multilevel Inverter Source: ir2110 circuit in proteus
