There comes a time in life to put childish things behind and give up nasty habits. Some, like smoking, can be damn hard without constant encouragement. It was time for me to combine my favorite hobby with my driving goal and make this: The Quit Success Meter! For my other Arduino contraptions, take a look
Mint-Sized Success Meter (quit smoking!) with Arduino Continue Reading
Where the honeybee’s division of labor has stayed on a steady progression for 25 million years… our human superorganism has grown more complex and in all directions… hence the bee counter… By: thomashudson.org Live data from – June 25, 2012 I’ve moved away from live data… my version 2 has an SD card and I’m
Honey Bee Counter using Arduino Continue Reading
My mailbox is across the street from my house because our mailmen don’t walk door-to-door, so I never know when the mail is delivered. Sometimes, I’m waiting for something and I’d really like to know when it arrives. I got my first Arduino last week, and thought it might be a neat toy project to
Arduino Snail Mail Notifier Continue Reading
This sketch blinks the Esplora’s RGB LED. It goes through all three primary colors (red, green, blue), then it combines them for secondary colors(yellow, cyan, magenta), then it turns on all the colors to create white. For best results, cover the LED with a piece of white paper to see the colors blend. Circuit Only
Arduino Esplora Blink Code Continue Reading
A potentiometer is a simple knob that provides a variable resistance, which you can read into the Arduino board as an analog value. In this example, you’ll connect a poterntiometer to one of the Arduino’s analog inputs to control the rate at which the built-in LED on pin 13 blinks. Circuit image developed using Fritzing. For
Analog Input using Arduino Continue Reading
In this instructable i will explain how to connect 7 segment display, decoder and arduino. It´s pretty easy. At first we have to learn something about decoder. I´m using BCD to 7 segment decoder. My is D147D, this is old chip, but the newer are similar. Documentation about one of them you can find here
Arduino and 7 segment LED display decoder Continue Reading
The Problem It is late night, and your cellphone rings. You can’t see where it is, you blindly grope around your nightstand, trying in vain to find that illusive switch that will illuminate your side of the bed. You clumsily turn on the lamp, locate your cellphone…and you miss the call. Damn. If only your
Capacitive Touch Arduino Lamp Continue Reading
This example shows how to use the tone() command to play different notes on multiple outputs. The tone() command works by taking over one of the Atmega’s internal timers, setting it to the frequency you want, and using the timer to pulse an output pin. Since it’s only using one timer, you can only play
SPlaying tones on Multiple outputs using the tone() function with Arduino Continue Reading
Once you’ve got a pushbutton working, you often want to do some action based on how many times the button is pushed. To do this, you need to know when the button changes state from off to on, and count how many times this change of state happens. This is called state change detection or edge detection. Circuit image developed
Button State Change Detection using Arduino Continue Reading
We use them every day, but has no one got bored of pressing buttons on a stick, it’s far too much effort pressing buttons! Surely there are better ways to control a device? After doing some work with my Nikon camera using IR to control it, I wanted to do the same with other devices.
Redefining the TV Remote using Arduino Continue Reading
