Build yourself a low-cost easy to assemble bluetooth controllable robotic bartender using an Arduino Uno. This easy Arduino based project can be 3D printed and is a cool Arduino project for beginners. The aim of this project was to create a bar robot that was low cost and easy for anyone to write their own […]
Arduino Robotic Bartender – 3D Printable & Bluetooth Continue Reading
In this video; 3D robot hand assembly, servo control, flex sensor control, wireless control with nRF24L01, Arduino receiver and transmitter source code are available. In short, in this project we will learn how to control a robot hand with a wireless glove. Step 1: Video Tutorial With this tutorial video you can see the robotic
Robotic Hand With Wireless Glove Controlled | NRF24L01+ | Arduino Continue Reading
Line follower robot is a useful robot that is used in ware houses, industries, and stores etc, where it follows a dedicated path. The presented robot captures line position with IR Sensors. If the robot get off the line it will U turn and back to the line again. Also, it would stop while the designed spot is
Line Follower Robot – Arduino Mega/uno – Very Fast Using Port Manipulation Continue Reading
The new design of the 6WD mobile platform, the vehicle uses 2mm aluminum alloy, aluminum spray surface treatment. 6 high-speed DC motor (original 17000 rpm), with 1:34 full metal gear box, so that the car to obtain strong off-road performance. Shock absorption design is the highlight of the car, the use of 6 damping shock
6WD Shock Absorption Robot for Arduino Continue Reading
We absolutely LOVE the new LEGO Star Wars sets that have come out over the last couple of years. They’re well designed, fun to build, and look great. What would make them even more fun is if they also moved on their own! We took an off the shelf LEGO BB-8 set and automated it
Automated LEGO BB-8! Continue Reading
Growing basil is great, but do you know what’s even better? Having an autonomous basil farm! As the saying goes: “never spend ten minutes doing something by hand, when you could spend 10 hours failing to automate it”. Although I may be bad at gardening, something I am good at is enthusiastically trying to solve
Autonomous Basil Farm With Robot Arm! Continue Reading
Hello, I’m Andre and this is how you can build and design your own robot with dancing features. This robot was designed as a team project for my junior design class at Georgia Tech. The entire system is completely controlled by an Arduino Uno microcontroller, with various user interface devices. The fundamental components to the
The CelloBot (Robot Design Controlled by an Arduino Uno) Continue Reading
This instructable was created in fulfillment of the project requirement of the Make course at the University of South Florida (www.makecourse.com). The Social Distancing Robot is a robot concerned with its health in the midst of the current pandemic. It has an RGB LED to indicate how close you are to it. If you are
Social Distancing Robot Continue Reading
In this instructable, you will be taught how to make a decorative robot head light by using RGB LED lights to create a visual effect in the robot’s mouth, the lights can shine brightly colored rainbow lights back and forth, almost as if the robot is tryiing to communicate! This design can be used at
DIY Robot Head Made Out of RGB LED Lights Continue Reading
This will not be a tutorial, just me reflecting on the process and sharing it! Welcome to RoboCat, a cute pet without the mess! The RoboCat responds to any sounds above a certain range and if you press the red button you can give him some love. He doesn’t say much, but he’s guaranteed to
RoboCat: a Pet Without the Mess Continue Reading
