Responsive Pneumatic Envelop (A useless machine) Mockingly inspired by the blowfish, Bounce Back builds on state of the art bubble wrap shipping envelops by only inflating its bubbles when frightened by rough handling. Inversely, when the package is not being shuck, it will not inflate itself. Creators: Christian Gotthilf Steixner, Ayşe Esin Durmaz Bounce Back!
“Sensor Retouch” touch sensitive interactive instrument which allows to play Water, Fruit, Plants and Conductive surfaces as a musical instrument by your touch. All you need is Arduino and few upgraded touch sensitive sensors, i’ll teach you how to put together everything and let start playing with your new interactive instrument ! A project by
Touch Sensitive Interactive Music Instrument DIY / OSX Version Continue Reading
This was my first animated Halloween prop. I found this witch at the local hardware store. It was meant to hang up by a cord and if someone came close to it, an infrared sensor would trigger the prop. The prop has LED eyes that would light up and it would trigger a voice tract
Halloween Pop-Up Prop Continue Reading
Hi guys, I made an automatic 3D Printed Pet Feeder (or just dispenser, but I use it to feed my dog). I 3D modelled all that project. U can print it by yourself. All parts are down there. Basically how it works, is u type in two Feeding Times, for example 8:30 and 17:30, then
Automatic Arduino Pet Feeder – 3D Printed (With Stepper Motor) Continue Reading
{This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com).} Inspired by the Wind powered machines built by “Theo Janse” I’ve come up with a design of my own, but with a twist. This design houses two 12volt motors to provide the power, an Arduino,
RC Strandbeest Continue Reading
This is meant as a guide to anyone soldering their own Arduino from a kit, which can be purchased from A2D Electronics. It contains many tips and tricks in order to build it successfully. You will also learn about what all the different components do. Read on and learn what it takes to build your very
Building a DIY Arduino on a PCB and Some Tips for Beginners Continue Reading
Hi There, Recently, I finished up on my DIY project Wilson: the IoT hat. Because of the big fun I had creating and using this IoT hat, and given the wonderful feedback it provided to the wearer, I really want to share this project with you. Wilson is a hat equipped with a multicolor LED
Wilson – the IoT Hat Continue Reading
A New Kind of InstrumentI invented Kravox during a research project at Lund University (Sweden) with the aim to give digital musical instrument controllers the feeling of conventional, mechanical instruments. Now I want to make Kravox accessible as a musical experimentation platform for everyone, so I created this detailed Instructable to enable as many people
Spatial Synthesizer Kravox! Wireless, Motion- & Touch-Sensing Continue Reading
Hello friends welcome back to “Techno-E-Solution” In this video I’ll be going to show you an interesting project “Smartphone controlled LED Using Arduino & Bluetooth with Own developed Application”, I developed this application on kodular app making platform. In this project, we control the LED using a smartphone, for the smartphone to Arduino communication I
Smartphone LED Controller Using Bluetooth With Own Application Continue Reading
This project will show you how to create a computationally enriched puppet that can detect magnetic fields. The puppet (who I call Compy) has two very sensitive GMR analog magnetic sensors that are located in her beak, these sensors are read by an Arduino Nano that actuates a 3×3 haptic display (Figure 3) based on
Sense Magnetic Fields Like a Bird – Sensory Extension Puppet Continue Reading
