An Egg plotter is an art robot that can draw on spherical shaped objects such as eggs. You could also use this machine to draw on ping pong balls and golf balls. You can use your imagination with the designs you put on it, you could for example make personalized eggs for Easter. In this
Arduino Based Egg Plotter Continue Reading
My first meeting with microcontrollers was a few decades ago (you might remember the first Parallax Basic Stamps) but with the Arduino platform it happened more recently, only 6 years ago and although at that time the development boards were quite difficult to find, even then I found it was a very interesting thing. Later
Arduino Magnetic Board Continue Reading
Once after Russian EFT community podcast where one of the guests said that expensive items, such as LEDX, should occupy a larger number of the slots in secure containers… It didn’t happen in 0.12,6 patch, but it did happened in my workshop. Supplies Things required: Arduino microcontroller (in different steps I used Arduino Uno and
12×12 LEDX From Escape From Tarkov Continue Reading
Heey my name is Rens Kuilman. For a school project (If This Then That) we had to make something using the Arduino. After a few misses I decided to make a random laser, which I a lazy cat owner could use the get his lazy cat to move. Supplies Arduino Uno [1x] SG90 Mini Servo
ITTT – Cat Laser Continue Reading
“Sensor Retouch” touch sensitive interactive instrument which allows to play Water, Fruit, Plants and Conductive surfaces as a musical instrument by your touch. All you need is Arduino and few upgraded touch sensitive sensors, i’ll teach you how to put together everything and let start playing with your new interactive instrument ! A project by Giuseppe Sicurella 2015 Check out the Project and my websites Dharma
Touch Sensitive Interactive Music Instrument DIY / Windows Version Continue Reading
In one of my previous Instructables, I showed you how you can use a Stepper motor as a rotary encoder. In this Instructable, let’s learn how we can use it to control our computer. So without further ado, let’s get started! Step 1: Watch the Video Watch the above video to get a better idea of
Control Your Computer With a Stepper Motor! Continue Reading
Before COVID hit my son went to a costume party dressed as Professor Alastor “Mad-Eye” Moody from Harry Potter. I made him a moving eyeball using an Arduino, servo and ping pong ball. Step 1: Parts list Arduino Uno https://smile.amazon.com/dp/B008GRTSV6 Arduino Case https://smile.amazon.com/dp/B00HFSWC06 9-volt Battery Clip https://smile.amazon.com/dp/B01AXIEDX8 12g Servo https://smile.amazon.com/s?k=ES08MA (any mini servo will do but I have yet to
Alastor “Mad-Eye” Moody Moving Eyeball Continue Reading
In this video we will have a closer look at a USB Type-C Power Delivery Trigger board. Such boards are used to output 5V, 9V, 12V, 15V or even 20V from a Power Delivery compatible power source. So I will be showing you how such a commercial board works and I will try to create
DIY USB Type-C Power Delivery Trigger Board Continue Reading
INTRODUCTION Hi. I’ve built this little device for my HNC project back in the old days (2015). Because I like photography, and my task was to make something using microcontrollers. I’ve made this little device using Arduino UNO, as this was an ideal board for this job (and cheapest). There were quite a few similar
COD (Camera on Deck) – Motion Time Lapse Continue Reading
This projects is a mix of two of my main passions, Arduino and Wind. Here is a simple project that I used this OLD PC fan as a small wind generator to sense the wind speed. Here we are using modified PC fan as a wind speed sensor using Arduino and showing the results on a smartphone running the
Arduino Bluetooth PC Fan Wind Sensor With RemoteXY Continue Reading
