A group of three students present you PAD HERO, our Arduino based Guitar Hero game. This project was submitted to ‘Creative Electronics’, a Beng Electronics Engineering module at University of Málaga, School of Telecommunications (https://www.uma.es/etsi-de-telecomunicacion/). The aim of this Project was to replicate the popular game Guitar hero on Arduino. We wanted to keep it
PAD HERO (Guitar Hero Using Arduino) Continue Reading
In a previous tutorial we have seen how to run two stepper motors synchronously from a given start position to a defined destination using an Arduino and a very simple “user interface”. That user interface was restricted to some microswitches and LEDs, both installed on a breadboard. As promised, this new instructable shows how to add a
Arduino: Portable Two-Axis Stepper Control Continue Reading
If, like me, you have a pellet stove which does not indicate the low level of the tank, I suggest this little module which will beep when the reserve is almost empty. This gap is problematic because when there are no more pellets, the stove switches off and the ventilation still blows for 40 minutes.
Tank Level Alert for Pellet Stove Continue Reading
This project is bases on the internet radio by Ed Smallenburg. He did an awesome job in creating a working internet-based radio. He shared his coding and hardware on the world wide web so that people like you and me can learn from it. He shared his build on GitHub using the copyleft license. (It
This is an easy way to make your boards into a fun laser tag game to play with friends. we combined both boards as described in the pictures. Supplies For this project you will need IR remotes, shoe laces, circuit playground express, ESP8266, battery case for the board and batteries Step 1: GIT Files Go
Laser Tag “Free for All” Circuit Playground Express and ESP8266 Continue Reading
The Picture Exchange Communication System, or PECS, allows people with little or no communication abilities to communicate using pictures. People using PECS are taught to approach another person and give them a picture of a desired item in exchange for that item. By doing so, the person is able to initiate communication. A child or
PECS Communication Board Continue Reading
In this Instructable, I’ll show you how I managed to create my own I2C controlled device that I can then connect to any microcontroller and interact with it over I2C. In my case, I’m using it to control an AC dimmer module from a separate Arduino Nano and I then interact with it from another
Custom I2C Slave Sensor/device With Arduino Continue Reading
ESP-01 ESP8266 is a popular and widely used module because of its low-cost, reliability and easily availability in the market. It can be used as a stand-alone device or connected with a microcontroller. The ESP-01 is the smallest ESP8266 module and it has limited I/Os. It has totally 8 pins, four of them are needed
MAXIMIZE THE CAPABILITIES OF ESP-01 ESP8266 Continue Reading
Let’s create a simple Gas Detector connectable to WiFi. The gadget would offer: web UI including gauges for LPG, CO, Smoke simple data handler returning values in JSON capable of regularly sending data to ThingSpeak server and obviously triggering laud alarm if threshold of dangerous concentrations exceeded. We would need following components: NodeMCU with ESP8266
In this IoT project, I have shown how to make an IoT-based Home Automation with Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. If the internet is not available, then you can control the home appliances manually with switches and IR remote. During the article, I have shown
Arduino IoT Cloud ESP32 Alexa Voice Control Smart Home | IoT 2021 Continue Reading
