In this instructables you will learn how to wire 4 LED’S and make them flash 10 times. This is a great Starter project!! what you will need… 1: arduino (I am using an Duemilanove) 1: breadboard 4: LED’s 10-15: jumper wires 3: resistors Step 1: Adding the LED’s and Resistors1 First put the LED’s on
Arduino 4 led madness Continue Reading
You probably know the game of flashlight-tag. You just run around in the dark on a campsite. You hold your flashlight and try to shine it on one of the other kids, without the other kids shining their lights on you. I wanted to make this game electronic. The Arduino is my first choice, but
Flashlight tag using an Arduino board Continue Reading
The resolvent of clock synchronization over internet. by PKJ, The web−based clock management system allows you to monitor clock status from wherever they are and centrally change settings. and this small device is built with PoE technology, thus IP clocks get their time, data and power from the same network that supports your other IP endpoints.
Build a network clock (NCLK) with Microduino-RTC Continue Reading
This instructable will tell you how to make and connect a soft potentiometer to a microcontroller, in particular we will connect it to a Lilypad Arduino. In our case soft potentiometer means a potentiometer made of a textile conductive ribbon. What you need: 1. soft conductive textile ribbon. The important thing here is that the
How to make (and connect) a soft potentiometer Continue Reading
To all other teens (I’m 16) who have begun to pick up an intrest in robotics and electronics the following project will give you a great user-system to get started with. This is not for complete beginers, but after only 6 months of teaching myself to code and develop robotics I have developed T.A.B.U. What
Introduction: T.A.B.U. A Robot using Arduino Continue Reading
This is a down and dirty prototyping shield that will work for Arduino Mega’s and there pin compatible clones. This is the first time i have made this board, but i have other projects i think this would be handy for. Limitations: I tend to build projects for megs that require multiple serial ports and
Prototyping shield for Arduino Mega Continue Reading
How to choose between ordering boards and low-risk home prototyping, with fabrication-file checks, inspection steps and authorized etchant waste handling.
PCB Fabrication Choices: File Checks, Inspection and Safe Etchant Handling Continue Reading
As a part of being an artist in residence at Instructables, I took it upon myself to build of couple of noise machines / music boxes. My interest lies in designing objects that would enable people to explore the world of sound synthesis and for me to get a better understanding on how the different
Making sound (noise) machines using Arduino Continue Reading
One day while exploring the bric-a-brac at the markets, I stumbled across an old, Bakelite slave dial from the 1950’s. Slave Dials are clock movements without the actual time keeping circuit. All they contain is the mechanism to drive the hour and minute hands, which can be advanced by an electric pulse. This pulse is
Make an Atom Synchronised Clock from a 1950’s Slave Dial using Arduino Continue Reading
In this project we make electronic dice. Updated 18/03/2013 In this article you can learn how to make an electronic die (die is the singular of dice), using an ATmega328 with Arduino bootloader and a few inexpensive components. The reason for doing this is to introduce another object that you can build, learn from and be proud
Make Electronic Dice using Arduino Continue Reading
