Water quality data monitoring for swimming pools, fish aquarium and more! Things used in this project Hardware components Arduino MKR1000 × 1 Jumper wires (generic) × 1 DFRobot pH Meter × 1 Resistor 4.75k ohm × 1 Temperature probe × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story I.
Water Quality Monitoring Using MKR1000 and ARTIK Cloud Continue Reading
This project is about building a simple weather dashboard using MKR1000 and Losant platform. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Software apps and online services Arduino IDE Losant Platform Story Introduction This project shows you how to make use of MKR1000
Weather Dashboard with MKR1000 and Losant Continue Reading
A really smart IoT socket. Switch ON/OFF your device by the smartphone using Cayenne Dashboard and Arduino MKR1000. Things used in this project Hardware components Arduino MKR1000 × 1 RobotGeek Relay × 1 9V 1A Switching Wall Power Supply × 1 Software apps and online services myDevices Cayenne Arduino IDE Arduino Web Editor Arduino Cloud
IoT Smart Socket Arduino And Cayenne Continue Reading
Getting started with Python and Arduino MKR1000 for secure IoT projects. Things used in this project Hardware components Arduino MKR1000 × 1 Software apps and online services Zerynth Studio Story Arduino MKR1000 meets Python With the last release, Zerynth officially supports Arduino MKR1000, a device specifically designed for secure IoT projects. The MKR1000 is described as a powerful board
Using Python and Arduino MKR1000 for Secure IoT Continue Reading
Home Automation through Wi-Fi connectivity (Arduino MKR1000) and Windows 10. Things used in this project Hardware components Arduino MKR1000 × 1 Relay (generic) Input: 3V × 1 General Purpose Transistor NPN × 1 1N4007 – High Voltage, High Current Rated Diode × 1 Resistor 10k ohm × 1 3.3k Ohm × 1 Breadboard (generic) ×
Home Automation with Arduino MKR1000 and Windows 10 Continue Reading
4Duino Intelligent Buggy project demonstrate how does uCAM-II works. This project also utilized two 4duino communicating using Server-Client architecture over TCP. It also uses a buggy car which carry the 4duino server and uCAM-II. By using built-in ESP8266, 4duino client sends a request to 4duino server to move the buggy and capture photo via wireless
Intelligent Buggy featuring 4Duino-24 Continue Reading
How to evaluate an Arduino OLED voltmeter: divider orientation, ADC reference uncertainty, display resolution, and why a screen adds no input protection.
This project allows you to transmit DHT environmental data from your MKR1000 to your own customizable Google Sheet for data logging. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Jumper wires (generic) × 1 Breadboard (generic) × 1 Software apps and online services
Send MKR1000 Data to Google Sheets Continue Reading
In this project, we will use a 4Duino and several IR sensors to create a simple pet food dispenser. 4Duino checks whether a food tray contains enough food or not. It is programmed to read IR values from each sensor. These values change depending on the amount of food in the container. The feeding time can
Pet Food Dispenser featuring 4Duino-24 Continue Reading
This demonstrates how to use your Arduino MKR1000 to connect to InitialState.com to produce colorful visualizations of your sensor data. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Breadboard (generic) × 1 Jumper wires (generic) × 1 USB-A to Micro-USB Cable × 1
MKR1000 to Initial State DHT Visulaizations Continue Reading
