Assembly instructions for an add-on board for the Arduino. **** FOR INSTRUCTIONS FOR MARCH 2013, KICKSTARTER PROJECT GO HERE http://www.instructables.com/id/Blinky-Fish-Kickstarter-Project/ ************ It has some LED’s and a button. It connects to digital pins 9-13 and ground. My hope is that this will be useful to people that want to play with writing code for the Arduino, but don’t want […]
The ElectroFried is a game with a shocking fun level. ElectroFried is developed for the Global Game Jam 2011 in Antwerp in design center the winkelhaak. The Team Jekkos/ Cinezaster decided to make a simple game based on colliding electrons. With a nasty side effect, a electro shock. As a input devised I hacked a old
ElectroFried electronic shock game using Arduino Read More »
First of all lets get this out of the way… It’s so bad This is going to be showing how to hack the Nintendo Powerglove. By hack I mean tap into the flex sensors and use the buttons and d pad and add anything you want. In my case I added an accelerometer. I got mine from
The game Mastermind has been around a long time, and I remember getting a board version with colored pegs when I was a kid. I love this game, as it is solvable simply by pure logic. One player (or a computer/microcontroller) chooses a sequence of colors from a pool of available colors and then the
Build a Complete AVR System and Play Mastermind using Arduino Read More »
We built a pseudo Etch-A-Sketch emulator that modifies its appearance based on the user’s environment – the temperature and light conditions. Instead of only drawing horizontal and vertical lines, we can draw curved lines by changing the slope of the current line to be drawn. We use two potentiometers to serve as the knobs of
When I was a kid, I loved playing with Estes Rockets, so I decided to get back into the hobby but using all of my maker skizzls. So here’s a really cool Arduino Rocket Launcher launching 3D Printed rockets from my MakerBot Rep2! Enjoy! Fully Open Source for anyone to make! Arduino Code on GitHub
Arduino Model Rocket Launcher for 3D Printed Rockets Read More »
We are going to make an Arduino control LED Piranha Plant :] Step 1: What you’ll need Arduino Uno 9 Resisters 9 LEDs – Red, Yellow, Orange is best since they need less amperage PIR sensor 9v battery arduino wall plug (you’ll be cutting the connection so that you can connect it to the battery. 12v
“THE CUBE” is a 3D jigsaw puzzle, with the added feature that a puzzle piece vibrates for approximately a second when it is placed in the correct place in the puzzle. We accomplished this by building an electrical design such that a circuit delivering power to a vibration motor was completed each time a puzzle
Here’s a retro hand-held gaming console I built with my son. It uses an Arduino micro-controller, a small LCD screen, push-buttons, a 3D printed case and home-grown “PC” board. It’s really pretty easy to solder and put together. My son & I wrote two games and a drawing program for it. See the video for
Magpi: The Micro Arduino Gaming Platform Interface Read More »
Well it’s that time of year again. That’s right, the sun is going down early, and it’s getting hard to avoid logging some miles on your bike after dark. You likely have great lights front and rear already, but what about on the sides of your bike? When crossing intersections, and cruising down those long
Flashing LED Top Tube Pad for your bike using Arduino Read More »
