Although we generally think of Internet of Things (IoT) and similar devices as things that are scattered around above ground, there are plenty of reasons to also have such devices underground. These so-called IoUT devices are extremely useful when it comes to monitoring underground structures, but communication via radiowaves is obviously impacted when soil is […]
USING LORA NODES AS SOIL MOISTURE SENSING ANTENNAS Continue Reading
We all know, at least intellectually, that our computers are all built with lots of tiny transistors. But beyond that it’s a little hard to describe. They’re printed on a silicon wafer somehow, and since any sufficiently advanced technology is indistinguishable from magic, they miraculously create a large part of modern society. Even most computers
There are many questions that can be asked for software projects, with most of these questions starting with ‘Why…?’. This is true for the challenge of proving that cascading stylesheets are Turing-complete, or that you don’t need all those fancy ISA bits of an ARM processors when you already got the LDM and STM commands in the 32-bit ISA.
TURING COMPLETE PROGRAMMING ON ARM WITH TWO INSTRUCTIONS Continue Reading
[mircemk] had previously built a frequency counter using an Arduino, with a useful range up to 6 MHz. Now, they’ve implemented a new design on a far more powerful STM32 chip that boosts the measurement range up to a full 30 MHz. That makes it a perfect tool for working with radios in the HF range. The
SIMPLE STM32 FREQUENCY METER HANDLES UP TO 30MHZ WITH EASE Continue Reading
Good news for users of the The Arduino GIGA R1 WiFi board: you can now add a nice touch display to your board with minimum effort thanks to the brand-new Arduino GIGA Display Shield. It provides a 3.97” RGB touch screen with 480 × 800 pixels and capable of producing 16.7 million colors. The touch screen is
Arduino GIGA Display Shield Has Microphone, IMU and Supports Multitouch Continue Reading
If you spend much time around industrial processes, you may have seen a vibrating bowl feeder at work. It’s a clever but simple machine that takes an unruly pile of screws or nuts and bolts, and delivers them in a line the correct way up. They do this by shaking the pile of fasteners in
FEED YOUR FASTENERS IN LINE, WITH A BOWL FEEDER Continue Reading
A Rogowski coil is a device for measuring AC current that differs from a conventional current transformer in that it has no need to encircle the conductor whose current it measures. They’re by no means cheap though, so over time we’ve seen some interesting variations on making one without the pain in the wallet. We
HACKADAY PRIZE 2023: ABUSE A REFERENCE CHIP FOR A CHEAP INSTRUMENT Continue Reading
You might find yourself, dear Hackaday reader, attracted to some pretty strange corners of the tech world. Who knows when that knowledge of stenography, ancient retrocomputing, and floppy disk internals will all combine to get someone falsely accused out of jail? Go read this story and come on back, but the short version is that [Bloop
If you live somewhere prone to power outages, you might have thought about buying a generator. The problem is that small generators are cheap but — well — small. Big generators are expensive. [Jake von Slatt] had an idea. He has a “yard car” which we thought might be a junk car but, instead, it
Robots are cool. Robots you build yourself are cooler, especially ones that use stuff you have lying around already. Snoopy is a new open-source robot that uses an Arduino as a brain but with a 3D printed body and a short list of parts that can probably be sourced from the junk drawer. It’s still being developed,
