CHOOSING A DIRECTION For this assignment, I embarked on my inaugural solo experience with Arduino. After facing some challenges during the in-class tutorial, I felt apprehensive about dealing with the breadboard once more. Consequently, I made an early decision to work on a simpler circuit. While exploring the components of the Arduino kit, the IR […]
Arduino Interfacing Introduction to Arduino: Arduino serves as a medium for engaging with the physical world through sensors. It constitutes an open-source physical computing platform centered around a straightforward and affordable micro-controller board, accompanied by a development environment tailored for writing software compatible with the board. As an open-source electronics prototyping platform, Arduino facilitates the
Introduction to Arduino: A Versatile Physical Computing Platform Continue Reading
I. Experiment Objective The main goal of this experiment is to gain proficiency in using the Arduino microcontroller to observe switches and sensors and to trigger devices like LEDs or a speaker based on specific sensor output values. II. Required Components List This experiment will necessitate the following components: • Two 1 kΩ resistors •
Introduction In this endeavor, we’re embarking on the construction of an Arduino-based animatronic eye. The inspiration for this project was born during my online quest for innovative project ideas, and this concept instantly captivated my interest. Firstly, its aesthetic appeal combined with a straightforward mechanism made it an intriguing choice. Moreover, the project provided a
Creating an Animatronic Eye with Arduino Using 3D Printing Continue Reading
NOTE: Vocab RFID Reader – The box-like object that can be activated by an RFID tag RFID Tag/RFID Card – The card or tag that activates the reader. I took apart one and is displayed in the pictures above. RFID System – The tag and the reader work together. Electromagnetic Waves – A wave that
Precision sharpening skills aren’t developed overnight! Here’s a high-tech way to monitor your knife angle during sharpening, with the help of an absolute orientation sensor and bluetooth microcontroller. This project is a collaboration with Alex French Guy Cooking! This is an intermediate level Arduino project, so if you’re an ultra-beginner or a bit rusty, brush up
Knife Sharpening Angle Coach With Bluetooth & Arduino Continue Reading
This project is a continuation and reimagining of my former colleague’s (metaterra) “Whisker Sensory Extension Wearable”. The purpose of this project was to focus on the creation of novel, computationally-enriched “sensory extensions” that allow for augmented-sensing of the natural world. My major effort with this project was devoted to the fabrication and implementation of sensory
Cat Whisker Sensory Extension Wearable (2.0) Continue Reading
Hey, fellas I hope you are doing well and getting smarter every day. This post is about How to Simulate Arduino in Proteus, here we will see how we can simulate Arduino codes in Proteus. Arduino UNO is a popular development board based on ATMEGA 328P which is an 8-bit microcontroller and Proteus is a popular tool for simulating electronic
How to Simulate Arduino in Proteus Continue Reading
I recently had my kitchen updated and knew that lighting would ‘lift’ the look of the cupboards. I went for ‘True Handless’ so I have a gap under the work surface, as well as a kickboard, under cupboard and on the top of the cupboards available and wanted to light them up. After looking around
Arduino Powered, Sensor Controlled Fading LED Light Strips Continue Reading
This instructable will explain how to wire, code, and build a functioning DIY arduino safe with multivibrator changeable 4-digit combination. Well what does that mean? A arduino safe with multivibrator changeable 4-digit combination is a functioning safe with a changeable password/combination, it features a series of multivibrator circuits to create the 4-digit combination, a input
Arduino Safe With Multivibrator Changeable 4-digit Combination Continue Reading
