DIY Air Quality Sensing from HabitatMap and Sonoma Tech




High-precision air quality monitors are normally very expensive, but Tim Dye of Sonoma Technology is on a mission to change that.  He’s been working with Michael Heimbinder and habitatmap.org to create a low-cost sensor system that when designed properly and integrated into a software platforms can provide valid data.

Air Quality Sensing




AirCasting is a platform for recording, mapping, and sharing health and environmental data using Arduino and Android. It combines an Arduino with a set of sensors for air quality measurement; temperature, humidity, and carbon monoxide, nitrogen dioxide, and particulate matter. The system combines the sensors using an Arduino Uno and then sends the data to an Android app using Bluetooth. The plans are all open for modification, so you can add your own sensors as needed. A heart rate monitor and an LED vest can also be linked to the AirCasting app, providing a complete the system for realtime, wearable feedback of your body’s reaction to the environmental air quality.

There are many DIY air quality measurement projects online, but most of them are not calibrated against known standards or professional equipment. But Dye and his colleagues have tested the AirCasting particulate matter sensors against the same equipment Sonoma Technology uses for precise measurement, and they’ve gotten surprisingly good results. Correctly constructed and deployed, the AirCasting shows promise as a low-cost alternative to complement the expensive high-end air monitors.

 

For more detail: DIY Air Quality Sensing from HabitatMap and Sonoma Tech

JLCPCB – Prototype 10 PCBs for $2 + 2 days Lead Time
China’s Largest PCB Prototype Enterprise, 300,000+ Customers & 10,000+ Online Orders Per Day
Inside a huge PCB factory: https://www.youtube.com/watch?v=_XCznQFV-Mw

READ  DIY Arduino electric screwdriver project




Leave a Comment

*
= 5 + 8

(Spamcheck Enabled)

Read previous post:
RC Rocket Launch System
RC Rocket Launch System

This instructable will show you how to make an RC launch system for your Estes rocket, which can be operated...

Close
Scroll to top