Add WiFi & Bluetooth Easily With Koala® Connect Modules




Clarinox Technologies Pty Ltd was formed with the aim of providing cost effective and innovative wireless embedded systems solutions to business. Due to the experience of the Clarinox team, more embedded systems are designed to develop leading edge solutions. In addition to delivering flexible and robust wireless protocol software for embedded systems developments.

Add WiFi & Bluetooth Easily With Koala® Connect Modules




Clarinox hottest products are Koala® Connect Modules! A compact option for adding Wi-Fi® and / or Bluetooth® to new and existing projects.

These modules will give you a stable environment while used with Koala® EVM, the first and only development board to support development for all major wireless technologies. It enables embedded systems developers to create both low and high power wireless systems communicating over Wi-Fi, Bluetooth Classic and Bluetooth Low Energy. It provides a fast and cost effective way to commence embedded wireless development with all major wireless technologies.

Each module features a single onboard processor to drive the user application in addition to multiple wireless protocols. The modules available are:

Koala® Connect Modules
KM-141201 (20 x 30mm BT/BLE)
KM-153101 (20 x 34mm Wi-Fi+BT/BLE)

Carrier Board for Koala® Connect
KC-018102

Sensor Modules
KM-990501 Sensor Board

The Koala EVM and wireless module family will help shorten development time, reduce development costs, and open the door to new possibilities for wireless device features.

And these are the specifications

Hardware Specifications

MCU: STM32F411 (Bluetooth/BLE), STM32F412 (Wi-Fi + Bluetooth/BLE)

Wi-Fi Radio: TI WL1831MOD / WL1837MOD

  • 802.11 a/b/g/n
  • 2.4 GHz & 5 GHz
  • -96.3dBm RX Sensitivity
  • STA, AP & Wi-Fi Direct Modes

Bluetooth / Bluetooth LE Radio: TI WL1831MOD / WL1837MOD

  • Dual-mode Bluetooth & Bluetooth Low Energy
  • Bluetooth v4.1 Compliance and CSA2 Support
  • Host Controller Interface (HCI) Transport for Bluetooth Over UART
READ  Simple Robotic Arm Project Using Arduino

I/O Signals: ADC, GPIO, I2C, I2S, SPI, UART, USB

Read more: Add WiFi & Bluetooth Easily With Koala® Connect Modules




Leave a Comment

*
= 3 + 2

(Spamcheck Enabled)

Read previous post:
THIS COMMODORE 16 IS AN NTSC ONE… NO, WAIT, IT’S A PAL ONE!
THIS COMMODORE 16 IS AN NTSC ONE… NO, WAIT, IT’S A PAL ONE!

We’re used to our computers being powerful enough in both peripheral and processing terms to be almost infinitely configurable under...

Close
Scroll to top