I have been shooting water drops for a while now…. since 2017. I still remember how excited I was when I got water drops bounce from the surface with my first setup I made with Littlebits… With these setups (Mark I and Mark II) I became inspired to give it a go and finally I […]
Adding touch interfaces to your projects might seem difficult at first, but it really isn’t. In this Instructable I’ll show you how to do it using an Arduino or ESP32 development board. What you will need: an Arudino* or ESP32 development board a wire some tinfoil some sticky tape *It should work on pretty much […]
As with so many other people, I’ve always been a massive Harry Potter fan. One of the coolest magical items in the series was almost certainly the Weasley family clock that had a hand for each family member, and moved to reflect their location. I had wanted to make my own version of the clock […]
A group of three students present you PAD HERO, our Arduino based Guitar Hero game. This project was submitted to ‘Creative Electronics’, a Beng Electronics Engineering module at University of Málaga, School of Telecommunications (https://www.uma.es/etsi-de-telecomunicacion/). The aim of this Project was to replicate the popular game Guitar hero on Arduino. We wanted to keep it […]
This pandemic time has been rough for us all, as it confined us in our homes thus not enabling the opportunity to go outside and meet with family and friends to engage in fun activities of all sorts, such as going to your nearby arcade to play some fun classic arcade games. However, what if […]
When making videos with a tripod fluid head, there aren’t that many movements you can do. You’ve got tilt and pan – so basically either a vertical movement or a horizontal movement. Both of these have one common characteristic: the camera stays in pretty much the same space for the whole movement, meaning you can’t […]
By: Sonya Singh Computer Engineering Step 1: Project Overview Have you ever dreamed of building a 2-bit adder calculator, which can display the results in both binary and decimal? Well, look no further – Through this guide, your dreams have finally come true! Not only will you learn to build the adder, but you’ll also […]
Hi makers, do you want to own a wordclock?There are a lot of nice instructions all over the web, but You’ve no access to a 3D printer and cnc machines to cut, laser or mill You don’t want to waste time and nerves fiddling with itsy-bitsy parts You don’t want to waste money, if there is […]
In this Instructable, we will describe how to turn a “retro” oil lamp into a NeoPixels based rechargeable lamp with colorful light effects. Supplies Arduino nano 12 bits NeoPixel ring Micro USB 5V 1A TP4056 Lithium battery charger module 3.7V 9800mAh Lipo Li-polymer Battery Rotary encoder Ec11 or KY-040 Module Self-locking square button switch An […]
In a previous tutorial we have seen how to run two stepper motors synchronously from a given start position to a defined destination using an Arduino and a very simple “user interface”. That user interface was restricted to some microswitches and LEDs, both installed on a breadboard. As promised, this new instructable shows how to add a […]
