If you are new or experienced in DIY electronics, you probably know about the Arduino. Arduino is an excellent option for microcontrollers; its products are reliable, open-source, affordable, and efficient, with high flexibility. The list shown displays the extensive variety of options available in Arduino projects. The list includes a range of project ideas; some are perfect for newcomers, while others are more challenging.
1. A Remote Control
You don’t have to immediately purchase a new remote control if your current one is giving you trouble. Design your own remote control for your television, speaker, or air conditioning unit using an Arduino project. All that is required is a small amount of soldering, creating a case, and you can make an infrared remote control.
2. An Automatic Trash Can
While not necessary, having an automated trash can in your home is a fun extra to have. Converting a used trash bin into an automated model with the help of an Arduino microcontroller, an ultrasonic sensor, and a micro-servo motor is quite straightforward. This is the perfect project for novices; just glue the motor and sensor to the trash and wire them together. Be careful where you position the sensor to prevent having to reach too far down to open the lid.
3. An Air Temperature and Quality Sensor
Have you ever desired to ascertain the air temperature and quality in your house? By using only a select few monitors, individuals can easily craft their own sensor to measure both air temperature and quality. Temperature, humidity, heat index, carbon monoxide, alcohol, toluene, ammonium, acetone, and carbon dioxide monitors are necessary. Furthermore, you will need an Arduino Nano-DHT 22 MQ 135-5V power supply, a push button, and a wooden box for the project.
4. A Kitchen Timer
An Arduino kitchen timer is a great beginners project for anyone that is looking to get a bit more experience before moving onto bigger projects. The finished device will have buttons to set the time and another button to start and stop the countdown timer. Your kitchen timer will also need to be fitted with a speaker and an LCD to display the remaining time on the countdown. All of these pieces of equipment can be found in an Arduino Starter Kit.
5. A RFID Security Scanner
Enhance your home security by making your own RFID security scanner. This identification system utilizes RFID devices to transmit data across short distances. Materials needed for this task are an Arduino Uno, a SparkFun RFID Reader Breakout, and an Adafruit RFID/NFC card.
6. An Earthquake Detector
An earthquake detector is another beginner level Arduino project. For this project, you will need the following materials:
- The setup from the LIS2HH12
- One green LED
- One red LED
- One yellow LED
- Three 690 ohm resistors
Remember that you will need to reset your device once you have created your project after a minor or major earthquake is detected to ensure that the LEDs are turned off.
7. A Coin Sorting Machine
With just a few materials, it is possible to make a coin sorting machine that works automatically. To make your own coin sorting machine, you just need Arduino Uno-controlled infrared sensors, an LCD screen, and cardboard. You will have to get a piece of cardboard and precisely cut out the shapes of various coins. Make sure to cut precisely because otherwise, your project may not function as anticipated.
Next, place your cardboard with the cut-out coin holes on a slope, with the IR sensors near the output path of the three coins. Next, connect the LCD to Arduino directly or using the I2C module. All you need to do after this is to program the Arduino coin counter.
8. Light Up Notification System
If you work as a delivery driver, then you will know that the process of accepting and managing new jobs can be very difficult especially because you have to pull over someone safe to view available loads online. Rather than having to manually check your phone, you can create your own Arduino notification system.
It is achievable to create a system using an Arduino Uno and an LED bulb that notifies you when a new task is ready at your home. This alert can cause the light to turn on. Place the light on your dashboard in a manner that minimizes distraction, allowing you to stay aware of possible job prospects while driving.
If you are worried about not noticing an LED light, you can always set up the device to utilize a speaker instead. Your speaker can be configured to make a distinct sound instead of being used as a light source.
9. A Security Alarm
This security alarm might not look all that sophisticated, but it can be very effective, and it makes a fun Arduino project. When the alarm is triggered, your Arduino home security alarm can be programmed to call you on your mobile phone to alter you to the intrusion. The hardware you will need for this project includes the Arduino Uno, a PIR Monition Detector Sensor and a GSM Module with Sim inserted.
10. A Weather Forecaster
You can create your own barometer to measure the atmospheric pressure, which can provide you with a pretty accurate short term weather forecast. The tools and components you will need to complete this project include:
- An Arduino Nano R3
- MyOctopus i2c Barometric Air Pressure Sensor BMP280
- SG90 Micro-servo moto
- Soldering iron
he operation of the device is uncomplicated; the servo motor acts as a pointer that shifts to show the shifting weather. A higher chance of rain is indicated when the dial moves to the left.
