UPGRADING A MIDI CONTROLLER WITH AN FPGA




While the “M” in MIDI stands for “musical”, it’s possible to use this standard for other things as well. [s-ol] has been working on a VJ setup (mixing video instead of music) using various potentiometer-based hardware and MIDI to interface everything together. After becoming frustrated with drift in the potentiometers, he set out to outfit the entire rig with custom-built encoders.

[s-ol] designed the rotary-encoder based boards around an FPGA. It monitors the encoder for changes, controls eight RGB LEDs per knob, and even does capacitive touch sensing on the aluminum knob itself. The FPGA communicates via SPI with an Arduino master controller which communicates to a PC using a serial interface. This is [s-ol]’s first time diving into an FPGA project and it looks like he hit it out of the park!.




Even if you’re not mixing video or music, these encoders might be useful to any project where a standard analog potentiometer isn’t accurate or precise enough, or if you just need something that can dial into a specific value quickly. Potentiometers fall short in many different ways, but if you don’t want to replace them you might modify potentiometers to suit your purposes.

Source: UPGRADING A MIDI CONTROLLER WITH AN FPGA




This Post / Project can also be found using search terms:

  • midi controller flight simulator

Leave a Comment

*
= 4 + 7

(Spamcheck Enabled)

Read previous post:
ARDUINO-WIRE-BENDER-PROBABLY-WON’T-KILL-ALL-HUMANS
ARDUINO WIRE BENDER PROBABLY WON’T KILL ALL HUMANS

Do you want to make your own springs? Yeah, that’s what we thought. Well, blow the dust off of that...

Close
Scroll to top