In this instructable I am going to show you how to build a weather station that logs the information that it collects on a sd card. Step 1: If You Prefer a Video Here It Is Step 2: Get All the Parts You need, 1 Arduino board, I used the pro mini 1 dht sensor […]
DIY Data logging weather station under $15 Read More »
In any power utility corporation ash dyke management is a huge issue. For fugitive dust control huge sprinklers that spray water all along the dry portion of the dyke are used but maintenance of these sprinklers is a problem as we really don’t have any idea when it’s going to rain or when it will
Weather Forecasting on ESP32 Read More »
deba168‘s new instructable is a weather widget: “an application that can be downloaded on your PC, laptop or a mobile device and perform the job of providing easy access to weather information” It’s an ESP8266 based weather display unit which retrieves localized weather information from http://www.wunderground.com by WLAN and displays it on a 128×64 OLED display.
Weather Widget using ESP8266 Read More »
4 Channel RF remote built using PT2262 and PT2272-M4 IC from Princeton technology. PT2262 used as Encoder (Transmitter) and PT2272-M4 Decoder (Receiver) ICs are heart of the project. The receiver provides 4 channel Momentary outputs. All outputs are TTL level can be interface with other circuits or relay board. Transmitter works with 5V to 12V
4 Channel RF Remote Controller Read More »
Learn to Build Arduino Weather Station using DHT11, Soil Sensor, and Nokia Display In this project tutorial, we are going to make an Arduino weather station using 2 sensors; FC-28 soil moisture sensor to measure the moisture and the DHT22 sensor to measure the temperature, humidity and the heat index. All the measured parameters (with the
DIY Arduino Weather Station using Nokia Display Read More »
Oh the weather outside is frightful, but hot cocoa is so delightful, so let’s order some hot cocoa on the go! An Arduino MKR1000 project. Things used in this project Hardware components Arduino MKR1000 × 1 Water Pump NOTE! THIS AND MANY OF THE OTHER PARTS ARE LINKED, BUT MUST CLICK SHOPPING CART TO FOLLOW
With this tutorial, you will learn how to get the weather data from a web service to your Arduino. Things used in this project Hardware components Arduino MKR1000 × 1 Story In this tutorial we would make use of the WiFiConnection of our mkr1000. We will get weather forecast of and activate the relay, connected
Getting weather data Read More »
This project combines Atomic Time keeping with local weather station, and additional cool projects using Arduino and Raspberry Pi. Things used in this project Hardware components Arduino UNO & Genuino UNO × 1 Raspberry Pi 2 Model B × 1 Adafruit Ultimate GPS Breakout × 1 DHT22 Temperature Sensor × 1 Adafruit RGB Backlight LCD
Smartphone Controlled Atomic Weather Station Read More »
Recently I’ve found this piece of electronic on the dumpster, it was looking interesting – compact case with battery holder, LCD display, temperature and humidity sensor. It has also radio transmitter, but I’m not interested in it since I don’t have the receiver station. I decided to bring it back to life. It seems that
Hacking home weather station transmitter Read More »
This project is about building a simple weather dashboard using MKR1000 and Losant platform. Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Software apps and online services Arduino IDE Losant Platform Story Introduction This project shows you how to make use of MKR1000
Weather Dashboard with MKR1000 and Losant Read More »
