usb

UP XTREME SBC FEATURES INTEL WHISKEY LAKE PROCESSOR

UP XTREME SBC FEATURES INTEL WHISKEY LAKE PROCESSOR

AAEON launched their UP board family back in 2015 with the original board featuring an Atom X5 Cherry Trail processor. Since then they’ve launched more models all based on processors with 10W or lower TDP (Thermal Design Power) such as UP Squared Apollo Lake development board. Now, they have introduced an Intel Core-U series Whiskey Lake processor (15W TDP) […]

UP XTREME SBC FEATURES INTEL WHISKEY LAKE PROCESSOR Continue Reading

HIGHLY INTEGRATED USB C BUCK CHARGER FROM MAXIM REDUCES SIZE BY 30 PERCENT

HIGHLY INTEGRATED USB-C BUCK CHARGER FROM MAXIM REDUCES SIZE BY 30 PERCENT

Designers of portable Li-ion battery-powered electronics now have a simplified and more flexible way to add a USB Type-C (USB-C) charging system to their products with the MAX77860 3A switch-mode charger from Maxim Integrated Products, Inc. (NASDAQ: MXIM). This USB-C buck charger provides the industry’s first integrated USB-C port controller and charger to eliminate the

HIGHLY INTEGRATED USB-C BUCK CHARGER FROM MAXIM REDUCES SIZE BY 30 PERCENT Continue Reading

RK3399 SOC BASED ROCK960 MODEL C FEATURES 4 LANES PCI E 2.1

RK3399 SOC BASED ROCK960 MODEL C FEATURES 4-LANES PCI-E 2.1

VAMRS Limited launched Rock96 Model C, which retains being part of their 96Boards ecosystem. ROCK960 is the first 96boards based on Rockchip processor. Featuring RK3399 with Dual A72 plus Quad A53 cores and Mali T860MP4 makes it one of the most powerful 96boards. Here is a brief explanation of 96board ecosystem: 96boards is a range of specifications with boards and peripherals offering different performance levels and features in

RK3399 SOC BASED ROCK960 MODEL C FEATURES 4-LANES PCI-E 2.1 Continue Reading

ROCK960 MODEL C BOARD – A CHEAPER VERSION OF ITS PREDECESSOR AT ONLY 69

ROCK960 MODEL C BOARD – A CHEAPER VERSION OF ITS PREDECESSOR AT ONLY $69

VAMRS has designed a new version of their board with the launch of the Rock960 model C, that is much cheaper than the early Rockchip RK3399 Rock960 board and still compliant to 96Board’s specifications without losing out in performance. In comparison with last year prices, 96Boards compliant Rock960 board was sold for $99 and up. It had these main features: Rockchip RK3399 processor, up to 4GB RAM,

ROCK960 MODEL C BOARD – A CHEAPER VERSION OF ITS PREDECESSOR AT ONLY $69 Continue Reading

LOW COST GL USB150 MICRO ROUTER – A POTENTIAL WEAPON IN DISGUISE

LOW COST GL-USB150 MICRO ROUTER – A POTENTIAL WEAPON IN DISGUISE

Micro routers are portable USB mini routers used for cyber privacy or as access points. They are easy plug and play devices. GL.inet has introduced a low-cost micro router based on OpenWRT. The GL-USB150 micro router comes with the Qualcomm QCA9331 CPU, MIPS processor with the speed of 400 MHz, 64 MB DDR3 Ram is installed for system memory purpose.

LOW COST GL-USB150 MICRO ROUTER – A POTENTIAL WEAPON IN DISGUISE Continue Reading

THE COMPACT BOXER 6405U THE GATEWAY TO INDUSTRY 4.0

THE COMPACT BOXER-6405U: THE GATEWAY TO INDUSTRY 4.0

AAEON, an award winning manufacturer of embedded PC solutions, is proud to announce the BOXER-6405U, a turn-key rugged embedded PC built to be flexible and adaptable to a wide range of Industry 4.0 applications, including machine vision, AI edge computing, and industrial IoT gateway. The BOXER-6405U is built to be a go-anywhere, work-anywhere solution. Rugged design gives it

THE COMPACT BOXER-6405U: THE GATEWAY TO INDUSTRY 4.0 Continue Reading

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD

Renesas Synergy™ TB-S5D3 Target Board Kit helps designers evaluate the operation and performance of the S5D3Microcontrollers. The S5D3 Target Board Kit offers initial firmware development and evaluation of the Synergy Software Package (SSP) on the Synergy™ S5D3 Microcontrollers. The Kit connects via a USB connector for the main MCU, or two PMOD connectors, and a selection of Pin

RS ADDS RENESAS SYNERGY S5D3 MCU AND DEVELOPMENT BOARD Continue Reading

BALANCED DESIGN AND HOW TO KNOW WHEN TO QUIT OPTIMIZING

BALANCED DESIGN AND HOW TO KNOW WHEN TO QUIT OPTIMIZING

I got a relatively inexpensive 6040 CNC machine, and have been spending most weekends making the thing work, and then cutting stuff, learning the toolchain, and making subsequent improvements. Probably 90% of my machine time has been on making improvements. It’s not that the machine was bad — I got the version with ballscrews and a decently

BALANCED DESIGN AND HOW TO KNOW WHEN TO QUIT OPTIMIZING Continue Reading

Scroll to Top