We created a LED matrix that shows a Pacman and a Ghost. The figure changes by pressing a button. Also, the ghost takes the color according to the external temperature. It means, if it is cold, the figure turn blue, but if it is warm outside it will change to red. Supplies 71 leds (led […]
The Internet of Things has brought a lot of formerly complex device applications into the homes of many craft brewers and wine makers. Applications with level sensors have been used for decades in large refineries, water treatment plants, and chemical plants. With sensor prices falling, now both industrial and DIY can monitor the volume of
Build a Tank Volume Reader in Under $30 Using ESP32 Continue Reading
This is Tahir Ul Haq and introduces you to another member in the family. This time the project is named as Weather Monitoring System. This is another TIVA based project presented by students of UET LHR. Weather monitoring plays an important role in human life, so the collection of information about weather changes is very
Harmful Algal Blooms (HABs) can have negative consequences for both marine life and human health, so it can be helpful to have early warning of when they’re on the way. Algal blooms deep below the surface can be especially difficult to detect, which is why [kutluhan_aktar] built an AI-assisted algal bloom detector. After taking images of
The official Arduino develop in team and engineers have this week introduced its new MKR IoT Carrier Rev2 specifically designed to help build Internet of Things projects. Equipped with five capacitive touch buttons, LCD display, IMU, humidity, pressure, temperature, light, gesture and proximity sensors. The tiny MKR IoT Carrier Rev2 offers a wealth of scope for your
Arduino MKR IoT Carrier Rev2 board built for home IoT projects Continue Reading
Texas Instruments’ 24-bit, 32 kSPS ADC is optimized for cost-sensitive applications that require simultaneous sampling Texas Instruments’ ADS131M08 8-channel, simultaneously-sampling, 24-bit ΔΣ ADC offers wide dynamic range, low power, and energy-measurement-specific features. These features make the device ideal for energy metering, power metrology, and circuit breaker applications. The ADC inputs can be directly interfaced with a resistor-divider
ADS131M08 8-CHANNEL SIMULTANEOUS SAMPLING DELTA-SIGMA (ΔΣ) ADC Continue Reading
My basement gets wet when it rains a lot so I wanted a way to monitor it. I decided to try using an ESP8266 as it has built in WiFi. I paired that with a DHT22 Humidity & Temperature Sensor and a float sensor to monitor my sump pump. Using the ESP8266 is easy enough
The goal of this project is to build a cheap alternative to measuring CO2 ppm in the air. It’s a nice simple way to see over-time change in ppm using a cheap NDIR carbon sensor and a temperature/pressure sensor to achieve better accuracy. In this project you will need to: – Solder – Wire –
The TR pcb mountable pressure transducer series from Merit SensorTM is a rugged, direct-media pressure monitoring solution designed for today’s toughest pressure sensing environments. This pressure transducer series offers a pressure range from 15psi to 500psi with a fully compensated amplified output. The TR series from Merit SensorTM is designed for air, liquid and gas harsh media
PRESSURE TRANSDUCER SERIES FROM MERIT SENSOR Continue Reading
The Particle Photon is a microcontroller suitable for wearable project’s considering it’s small form factor and that it supports OTA updates. For those of you who do not know what a Particle Photon is it is a tiny microcontroller with on board WiFi (Cypress WiFi chip) and the STM32 ARM Cortex M3 microcontroller, which is ideal for cool
Particle Photon – Wearable Pulse and Temperature Sensor Continue Reading
