This sketch is used by Exercise: A4988 Stepper Motor Driver. Full Source Code The full code is all in one file StepperSweep.ino. // StepperSweep – move a stepper motor at different rates // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms of the BSD 3-clause license as included in LICENSE. // […]
Arduino Sketch Stepper Sweep Read More »
Many people have the means now to create little plastic objects thanks to 3D printing. However, injection molding is far less common. Another uncommon tech is plastic recycling, although we do occasionally see people converting waste plastic into filament. [Manuel] wants to solve both of those problems and created an injection molder specifically for recycling. The
REDUCE, REUSE, INJECTION MOLD Read More »
Measuring the speed/rpm of a Vehicle or a motor has always been a fascinating project to try. In this project, we are going to build a Analog Speedometer using the Arduino. We will use IR Sensor module to measure the speed. There are other ways/sensors for this, like hall sensor to measure speed, but using an IR
Analog Speedometer Using Arduino and IR Sensor Read More »
Step 1: Introduction Description: Bipolar Stepper Motor is DC motor that move in discrete steps. It has multiple coils that are organized in groups called “phases”. By energizing each phase in sequence, the motor will rotate, a step at a time. In order to be able to move the motor, you will need a motor
How to Interface Stepper Motor With Arduino Read More »
Tiny Board has been designed around LV8772 IC from On-Semi. This driver is capable of micro-step drive and supports 4W 1-2 phase excitation. It has Low on Resistance with motor current selectable in four steps. The board is equipped with unusual condition warning LED and input Pulse Monitor LED. It is most suitable for the
2.5A Bipolar Stepper Motor Driver LV8772E Read More »
When we need precision and repeatability, a stepper motor is always the solution. With the way it is designed, a stepper can only move from one step to the next and fix in that position. A typical motor has 200 steps per revolution; if we tell the motor to go 100 steps in one direction,
Arduino Stepper Motors Read More »
C055_1 This project is a 4-phase unipolar stepper motor controller. Description Unipolar 4-Phase Stepper Motor Controller Board will help you control a Stepper Motor or 4 individual Solenoids. This circuit consisting of transistors that serve as current amplifier and also diode to prevent damaging back EMF, circuit uses Darlington transistors to provide high current capacity
Unipolar 4-Phase Stepper Motor Controller Read More »
Stepper motors are brushless DC motors which can move in discrete steps thanks to the special coil arrangement inside. They are very popular in DIY and industry projects which require accurate mechanical movement control. In this SoloPCB Designer project, we are building a dual stepper motor driver shield based on two Allegro A4988 ICs which
DIY Dual Stepper Motor Driver Shield for Arduino Read More »
This post starts a small (or larger?) series of tutorials using the Arduino Motor/Stepper/Servo Shield with the FRDM-KL25Z board. That motor shield is probably one of the most versatile on the market, and features 2 servo and 4 motor connectors for DC or stepper motors. That makes it a great shield for any robotic project
Tutorial: Arduino Motor/Stepper/Servo Shield – Part 1: Servos Read More »
Project Summary: This project uses ULN2003 chip to drive. The working voltage is DC5V. It is widely used on ATM machine, inkjet printer,cutting plotter, fax machine,spraying equipment, medical instruments and equipments, PC peripheral, and USB Mass Storage ,precise instrument,industrial control system,office automation,robot areas,etc. Bill of Materials: 1.Arduino UNO V3.0 R3 Board or Compatible Arduino 2.1602A HD44780
Stepper Motor Control System Based On Arduino With ULN2003 Chip Read More »
