bOunce is a haptics-based learning game system that teaches the concepts behind wave dynamics, and in particular, resonance. The bOunce device (an adaptation of the Haptic Paddle) allows a user to “bounce” a ball in a virtual environment. By feeling the haptic force feedback from the virtual ball, as well as seeing the ball’s waveform […]
Katrina And Maya Continue Reading
UPDATE FEB 2012: This guide is featured on Adafruit’s blog http://www.adafruit.com/blog/2012/02/14/arduino-based-line-follower-robot/ This is Faz3a II, my first line-following robot, which I also hope to use for maze-solving. I used the Arduino Uno, Adafruit motor shield, Pololu’s QTR-8RC line sensors and motors. You can build a cheaper and lighter version of this robot using the Atmel
Arduino-based line follower robot using Pololu QTR-8RC line sensor Continue Reading
This Sumo Bot was designed, built, programmed and tested over a 12 week period for one of my final year engineering classes. The aim was to design and build a lightweight fully autonomous sumo fighting robot for an in class Sumo Bot competition. The robot was required to push, lift or flip the opponent’s robot out
Autonomous Sumo Combat Robot with Pneumatic Flipper – How to Continue Reading
Here you will learn how to create an internet controlled robot or other installation using Livebots. Livebots is a project I’m working on which consists of an easy to use website for all the robots that people can interact with through the internet. As an example I will be using a simple Arduino UNO with a LED
Create an internet controlled robot using Livebots Continue Reading
The Boot Bot Shield lets you burn the arduino boootloader onto a blank Atmega 328 chip. The bootloader is that magic piece of software that turns a mundane chip into the open source programmable miracle known as the arduino. Blank chips cost a few dollars less per chip than bootloaded ones. With the Boot Bot
Boot Bot Arduino Bootload Shield Continue Reading
I built a remote-controlled robotics platform using a 4WD mobile platform, an Arduino (Seeeduino Mega), an Adafruit motor shield, and two XBee radios for communication. There are also some super-bright white LEDs on the front for headlights. The point of the project was to show how an XBee radio can be used to send joystick
Wireless Robotics Platform with XBee Remote Control Continue Reading
For my first IoT project I wanted to build a Weather Station and send the data to data.sparkfun.com. Small correction, when I decided to open my account in Sparkfun, they were not accepting more connections, so I choose another IoT data collector thingspeak.com. Continuing… The system will be placed on my balcony and will retrieve temperature,
ESP32 Solar Weather Station Continue Reading
I want to make a robo arm with less cost which draw cute pictures. That robot want to make my Daughter happy and it can able to dance. I saw a Cutest drawing robot in Kickstarter. I like it very much and want to make one such robot. So i go through my school life
Cute Drawing Buddy V1, SCARA Robot – Arduino Continue Reading
A friend gave me one of Adafruit’s circuit playgrounds (developer edition) to use, and I wanted to see would it make a good robot controller. The circuit playground is packed full of features like sensors, neo-pixels and even an accelerometer. I wanted to add a L9110 motor controller and create a small bot I could
Adafruit’s Circuit Playground As a Robot Controller With Bluetooth Continue Reading
Many years back when I was still quite heavily involved in the day-to-day company IT matters, we need to subscribe to a service called “Smart Finger” when we put our servers in a datacenter. Basically what this service is all about is to allow datacenter technician to help us to press the power or reset
Simple IoT Remote Switch With MQTT and ESP8266 Continue Reading
