outputs Archives - Page 2 of 4 - Use Arduino for Projects

BREAKTHROUGH IN CO2 SENSING: FIRST SENSIRION MINIATURIZED CO2 SENSOR

Electronics News Updates / By Ibrar Ayyub

Once again, Sensirion trailblazes innovation in environmental sensing to create healthier and more productive environments for people. At this year’s Sensor+Test 2019 in Nuremberg and SensorsExpo 2019 in San José, the expert in environmental sensing, Sensirion, is announcing the SCD40 – the first miniaturized CO2 and RH/T sensor that fits in a space of just one […]

BREAKTHROUGH IN CO2 SENSING: FIRST SENSIRION MINIATURIZED CO2 SENSOR Continue Reading

AUTOMATED SENTRY TURRET FOR YOUR SECRET LAB

Arduino News / By Muhammad Bilal

There are few things as frustrating when you’re trying to get some serious hacking done than intruders repeatedly showing up without permission. [All Parts Combined] has the solution for you, with a Kinect-based robotic sentry turret to keep them at bay. The system consists of a Microsoft Kinect V2 connected to a PC, which runs an app

AUTOMATED SENTRY TURRET FOR YOUR SECRET LAB Continue Reading

TINY IR LED OUTPUTS 1,300MW AT 940NM

Electronics News Updates / By Ibrar Ayyub

Providing up to 1,300 mW in an industry standard package, the new LUXEON IR 2720 is optimized for a variety of cost conscious infrared applications requiring high power outputs. Lumileds today introduced the LUXEON IR 2720 Line, high power emitters that set the standard for abundant radiant power delivered in an industry standard package for

TINY IR LED OUTPUTS 1,300MW AT 940NM Continue Reading

SECO “SBC-C43” MODULE FEATURES CORTEX-A72 ENABLED I.MX8.

Electronics News Updates / By Ibrar Ayyub

Seco is developing a 3.5-inch “SBC-C43”, which runs Linux or Android on an up to hexa-core i.MX8, offering up to 8GB soldered DDR4 and 32GB eMMC plus WiFi/BT, 2x GbE, 3x USB, HDMI 2.0 in and out, 2x M.2, and -40 to 85°C support. Seco’s 3.5-inch SBC enables soldered memory and optional industrial temperature support. It’s built

SECO “SBC-C43” MODULE FEATURES CORTEX-A72 ENABLED I.MX8. Continue Reading

ScopeFun – Open Source All-in-One Instrumentation

Electronics News Updates / By Ibrar Ayyub

Five Benchtop Tools in One Open Source Device. ScopeFun in an open source, all-in-one instrumentation platform. It includes an oscilloscope, arbitrary waveform generator, spectrum analyzer, logic analyzer, and digital pattern generator. Hardware Hardware is built around Xilinx Artix-7 FPGA with an onboard RAM available for buffering samples (512 MB DDR3 SDRAM). All hardware settings are

ScopeFun – Open Source All-in-One Instrumentation Continue Reading

Bode Analyzer using STM32F407 Discovery board

Electronics News Updates / By Ibrar Ayyub

Introduction Frequency domain analysis is very important to know more about any system/ circuit or transfer function that we deal with. And the first thought comes to our mind about frequency domain analysis is “Bode plot“. Bode plot is a combination plot of magnitude and phase difference of output vs. input of a cosine wave

Bode Analyzer using STM32F407 Discovery board Continue Reading

Compact COM Express-based subsystem packs plenty of DAQs

Electronics News Updates / By Ibrar Ayyub

Zeta is a Single Board Computer (SBC) from Diamond Systems that combines a COM Express Mini Type 10 module based on Apollo Lake or Bay Trail SoCs with a DAQ-rich carrier, and a heat spreader mounted below. The Zeta COM Express Mini Type 10 supports the quad-core Atom E3940 and Pentium N4200 from Intel’s Apollo

Compact COM Express-based subsystem packs plenty of DAQs Continue Reading

FEEL THE FORCE WITH A POCKET MAGNETOMETER

Arduino News / By Muhammad Bilal

With the rise of affordable 3D printers, we just don’t see the projects in Tic Tac boxes that we used to. That’s kind of a shame. Not only are you upcycling existing plastic when you use one, they’re decently sized component vessels for pocket builds such as [rgco]’s portable magnetometer, especially if you can get the

FEEL THE FORCE WITH A POCKET MAGNETOMETER Continue Reading

5 Must-Have Tools for Arduino Beginners

Blog / By Muhammad Bilal

Arduino is an open-source electronics platform or board, as well as the software used. Arduino boards are meant to read an input and turn it into a corresponding output, such as turning a Twitter notification into an email notification should someone desire that functionality. Instructions are sent using the Arduino programming language and Arduino software.

5 Must-Have Tools for Arduino Beginners Continue Reading

How to Control a Nixie Tube With an Arduino

Other Projects / By Ibrar Ayyub

A Nixie Tube is a Neon gas-filled tube, that has a wiremesh anode with various cathodes shaped like numbers or symbols. Back in the 1950s they were used in computers, calculators, and laboratory equipment. Nixie tubes were replaced by LEDs and VFDs(vacuum fluorescent displays)in the 1970s. They were too costly to to mass produce so

How to Control a Nixie Tube With an Arduino Continue Reading